Wheel Hub 512333
The DUHUI Bearing 512333 wheel hub is a direct OE-replacement assembly designed for Jeep Compass and Dodge Caliber models from 2007 through 2009. This rear wheel hub bearing matches OE references including 512333, RW8333, and 5105770AC, and is engineered for rear axle applications on these compact SUV and hatchback platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1225 |
| Part Number | 512333 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Flange Offset | 60.60 mm (2.386 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 80.00 mm (3.150 inch) |
| Hub Pilot Diameter | 74.00 mm (2.913 inch) |
| Wheel Pilot Diameter | 67.00 mm (2.638 inch) |
| Hub Bolt Circle Diameter | 99.00 mm (3.898 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.25 |
| Spline Quantity | 25 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1225
OE Numbers: 512333, RW8333, 5105770AC, 5105770AB, 5105770AD, 05105770AC, 68029590AA
Reference Numbers (Interchange):
SKF: BR930588
Timken: HA590262
NTN: WE61641
MOOG: 512333
Mevotech: H512333
BCA: 512333
GMB: 730-0346
Vehicle Fitment
Jeep: Compass (2007-2009)
Dodge: Caliber (2007-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly.
- 25-spline count ensures proper engagement with the axle shaft on 4WD models.
- 140.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Jeep Compass and Dodge Caliber models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Jeep Compass and Dodge Caliber models – verify position before ordering.
- Confirm the 25-spline count on the axle shaft matches this hub before installation.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
