Wheel Hub 512328
The DUHUI Bearing 512328 wheel hub is a direct OE-replacement assembly designed for Subaru Tribeca B9 models from 2005 through 2014. This rear wheel hub bearing matches OE references including 512328, VKBA7678, and RW8328, and is engineered for rear axle applications on this midsize SUV platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1222 |
| Part Number | 512328 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 138.00 mm (5.433 inch) |
| Flange Offset | 63.50 mm (2.500 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 58.00 mm (2.283 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Hub Bolt Circle Diameter | 110.00 mm (4.331 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.25 |
| Spline Quantity | 27 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1222
OE Numbers: 512328, VKBA7678, RW8328, 28473-XA00A, 28473XA00A, 28473-XA01A, 28473XA01A
Reference Numbers (Interchange):
SKF: VKBA7678
Timken: HA590481
NTN: WE61845
MOOG: 512328
Mevotech: H512328
BCA: 512328
GMB: 725-3360
Vehicle Fitment
Subaru: Tribeca (B9) (2005-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly.
- 27-spline count ensures proper engagement with the axle shaft on AWD models.
- 138.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Subaru Tribeca B9 models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Subaru Tribeca B9 models – verify position before ordering.
- Confirm the 27-spline count on the axle shaft matches this hub before installation.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Subaru factory specifications for the Tribeca – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
