Wheel Hub 512327
The DUHUI Bearing 512327 wheel hub is a direct OE-replacement assembly designed for Honda Accord and Acura TSX models from 2004 through 2008. This rear wheel hub bearing matches OE references including 512327, BR930607, and RW8327, and is engineered for rear axle applications on these sedan platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1221 |
| Part Number | 512327 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 139.40 mm (5.488 inch) |
| Flange Offset | 58.70 mm (2.311 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Pilot Diameter | 74.00 mm (2.913 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M10 x 1.25 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1221
OE Numbers: 512327, RW8327, BR930607, 42200-SDA-A11, 42200-SDA-A12, 42200-SEA-A01, 42200-SEA-A02
Reference Numbers (Interchange):
SKF: BR930607
Timken: HA590200
NTN: WE61638
MOOG: 512327
Mevotech: H512327
BCA: 512327
GMB: 730-0338
Vehicle Fitment
Honda: Accord (2005-2007)
Acura: TSX (2004-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly.
- 139.40 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Honda Accord and Acura TSX models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Accord and Acura TSX models – verify position before ordering.
- Confirm the 5-stud flange pattern and 139.40 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Accord and TSX – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
