Wheel Hub 512154
The DUHUI Bearing 512154 wheel hub is a direct OE-replacement assembly designed for Chrysler Cirrus, Sebring, Dodge Stratus, and Plymouth Breeze models from 1995 through 2006. This rear wheel hub bearing matches OE references including 512154, BR930194, and RW8154, and is engineered for rear axle applications on these sedan and convertible platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1064 |
| Part Number | 512154 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 135.10 mm (5.319 inch) |
| Bolt Circle Diameter | 95.00 mm (3.740 inch) |
| Brake Pilot Diameter | 57.20 mm (2.252 inch) |
| Hub Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Pilot Diameter | 56.90 mm (2.240 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1064
OE Numbers: 512154, RW8154, BR930194, 4762536, 4762536AA, 4762536AB, 4762696AA
Reference Numbers (Interchange):
SKF: BR930194
Timken: HA590060
NTN: WE60428
MOOG: 512154
Mevotech: H512154
BCA: 512154
GMB: 730-0062
Vehicle Fitment
Chrysler: Cirrus (1995-2000) Non-ABS, Sebring (1996-2000) Convertible Non-ABS
Dodge: Stratus (1995-2000) Non-ABS, Stratus (2001-2005) Sedan Non-ABS, Stratus (2006) Non-ABS
Plymouth: Breeze (1996-2000) Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 2 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 135.10 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Chrysler Cirrus, Sebring, Dodge Stratus, and Plymouth Breeze models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Chrysler Cirrus, Sebring, Dodge Stratus, and Plymouth Breeze models without ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 135.10 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
