Wheel Hub 512302
The DUHUI Bearing 512302 wheel hub is a direct OE-replacement assembly designed for Jeep Commander and Grand Cherokee models from 1998 through 2011. This rear wheel hub bearing matches OE references including 512302, RW8302, and 52111884AB, and is engineered for rear axle applications on these SUV platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1199 |
| Part Number | 512302 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 164.60 mm (6.480 inch) |
| Flange Offset | 63.50 mm (2.500 inch) |
| Bolt Circle Diameter | 127.00 mm (5.000 inch) |
| Brake Pilot Diameter | 71.90 mm (2.831 inch) |
| Hub Pilot Diameter | 84.80 mm (3.339 inch) |
| Wheel Pilot Diameter | 71.40 mm (2.811 inch) |
| Hub Bolt Circle Diameter | 119.40 mm (4.701 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | 1/2-20 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.75 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1199
OE Numbers: 512302, RW8302, 52111884AB, 52111884AA, 52089473AA, 52111884AC
Reference Numbers (Interchange):
SKF: BR930505
Timken: HA590157
NTN: WE61430
MOOG: 512302
Mevotech: H512302
BCA: 512302
GMB: 730-0128
Vehicle Fitment
Jeep: Commander (XK) (2005-2010), Grand Cherokee (WJ, WG) (1998-2005), Grand Cherokee (WK) (2004-2011)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 164.60 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Jeep Commander and Grand Cherokee models.
- 5 wheel studs with 1/2-20 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Jeep Commander and Grand Cherokee models without ABS – verify your brake configuration before ordering.
- Confirm the 5-stud flange pattern and 164.60 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Jeep factory specifications for the Commander and Grand Cherokee – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
