Wheel Hub 512033
The DUHUI Bearing 512033 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Lancer, Mirage, Pony, and Dodge and Plymouth Colt models from 1988 through 2003. This rear wheel hub bearing matches OE references including 512033, MB633630, and RW833, and is engineered for rear axle applications on these compact sedan and hatchback platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1031 |
| Part Number | 512033 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 125.00 mm (4.921 inch) |
| Flange Offset | 56.40 mm (2.220 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Pilot Diameter | 63.50 mm (2.500 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1031
OE Numbers: 512033, MB633630, RW833, MB633630, MB633631, MB633632
Reference Numbers (Interchange):
SKF: BR930237
Timken: 512033
NTN: HUB115-1
BCA: 512033
MOOG: 512033
SNR: R173.15
KOYO: DACF1079R-2
Mevotech: H512033
Vehicle Fitment
Mitsubishi: Pony Hatchback (CA_A) (1992-1996), Lancer Hatchback (C6_A, C7_A) (1988-1994), Lancer Sedan (CB/D_A) (1991-1996), Lancer Sedan (CK/P_A) (1995-2003), Mirage (1993-1996) with 4-Wheel ABS
Dodge: Colt (1993-1994) Base with 4-Wheel ABS, Colt (1993) GL with 4-Wheel ABS, Colt (1993-1994) SE with 4-Wheel ABS, Colt (1994) ES with 4-Wheel ABS
Plymouth: Colt (1993-1994) Base with 4-Wheel ABS, Colt (1993) GL with 4-Wheel ABS, Colt (1993-1994) SE with 4-Wheel ABS, Colt (1994) ES with 4-Wheel ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 2 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 125.00 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Mitsubishi Lancer, Mirage, and Dodge and Plymouth Colt models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, BCA, and SNR part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Lancer, Mirage, and Dodge and Plymouth Colt models without ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 125.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
