Wheel Hub 512265
The DUHUI Bearing 512265 wheel hub is a direct OE-replacement assembly designed for Hyundai Sonata models from 2006 through 2009 and Kia Optima models from 2006 through 2010. This rear wheel hub bearing matches OE references including 52730-3K000 and 52730-2G200. It features an integrated ABS tone ring sensor and a 5-stud flange, engineered for rear axle applications on these front-wheel drive sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1169 |
| Part Number | 512265 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inside Diameter | 76.00 mm (2.992 inch) |
| Outside Diameter | 148.00 mm (5.827 inch) |
| Flange Diameter | 147.90 mm (5.823 inch) |
| Flange Offset | 59.00 mm (2.323 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.00 mm (2.638 inch) |
| Brake Pilot Diameter | 76.00 mm (2.992 inch) |
| Hub Pilot Diameter | 72.90 mm (2.870 inch) |
| Wheel Stud Quantity | 5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1169
OE Numbers: 52730-3K000, 52730-2G200, 52730-2G300
Reference Numbers (Interchange):
SKF: BR930321
SKF: BR930733
Timken: 512265
Timken: HA590325
MOOG: 512265
Mevotech: H512265
BCA: WE60857
SNR: R184-41
FAG: 713619660
GMB: 7460247
NTN: WE60857
Beck/Arnley: 051-6152
Vehicle Fitment
HYUNDAI: Sonata (2006-2009) 4-Wheel ABS
KIA: Optima (2006-2010) 4-Wheel ABS, with 5 Stud Hub
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS tone ring into one pre-assembled unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring monitors wheel speed for anti-lock braking systems – no separate sensor installation required.
- 147.90 mm flange diameter with 5-stud wheel pattern and 4-bolt flange mounting matches the original configuration on Hyundai Sonata and Kia Optima rear axles.
- 76.00 mm inside diameter and 148.00 mm outside diameter provide the correct bearing envelope for these sedan platforms.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930321, Timken 512265, MOOG 512265, and NTN WE60857 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Sonata (2006-2009) and Kia Optima (2006-2010) models with 4-wheel ABS.
- Confirm the 5-stud wheel pattern and 4-bolt flange pattern match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and flange bolts to manufacturer specifications for the specific vehicle platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
