Wheel Hub 512264
The DUHUI Bearing 512264 wheel hub is a direct OE-replacement assembly designed for Honda Insight models from 2000 through 2006. This rear wheel hub bearing matches OE references including 42200-S3Y-951. It features a Gen 3 hub unit design with 4 wheel studs and an integrated ABS tone ring, engineered for rear axle applications on this hybrid hatchback platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1168 |
| Part Number | 512264 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inside Diameter | 61.00 mm (2.402 inch) |
| Outside Diameter | 133.80 mm (5.268 inch) |
| Flange Diameter | 133.80 mm (5.268 inch) |
| Flange Offset | 51.44 mm (2.025 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Brake Pilot Diameter | 61.00 mm (2.402 inch) |
| Hub Pilot Diameter | 60.00 mm (2.362 inch) |
| Bolt Size | M12 x 1.5 |
| Wheel Stud Quantity | 4 |
| ABS Sensor | Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1168
OE Numbers: 42200-S3Y-951
Reference Numbers (Interchange):
SKF: BR930380
Timken: HA590008
NTN: WE60549
MOOG: 512264
BCA: 512264
GMB: 735-0354
Mevotech: H512264
WJB: WA512264
Quality-Built: WH512264
Vehicle Fitment
HONDA: Insight (2000-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS tone ring into one pre-assembled unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring monitors wheel speed for the Insight rear axle – no separate sensor installation required.
- 133.80 mm flange diameter with 4-stud flange pattern and 100.00 mm bolt circle matches the original mounting configuration on Honda Insight rear axles.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930380, Timken HA590008, NTN WE60549, and MOOG 512264 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Insight (2000-2006) models with 4-wheel ABS.
- Confirm the 4-stud wheel pattern and 133.80 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications – do not use an impact wrench to avoid bearing damage.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
