Wheel Hub 512260
The DUHUI Bearing 512260 wheel hub is a direct OE-replacement assembly designed for Honda Element models from 2003 through 2005. This rear wheel hub bearing matches OE references including 42200-SCV-A01 and 42200-SCV-A02. It features a Gen 2 hub unit design with a non-ABS configuration, engineered for rear axle applications on DX and LX trim levels of this SUV platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1165 |
| Part Number | 512260 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Inside Diameter | 80.60 mm (3.173 inch) |
| Flange Offset | 16.50 mm (0.650 inch) |
| Flange Bolt Hole Quantity | 3 |
| Flange Bolt Hole Diameter | 10.00 mm (0.394 inch) |
| Knuckle Bolt Hole Size | M10 x 1.25 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1165
OE Numbers: 42200-SCV-A01, 42200-SCV-A02
Reference Numbers (Interchange):
SKF: BR930496
Timken: BM500000
Timken: BM500002
NTN: HUB287-8
BCA: 512260
MOOG: 512260
GMB: 735-0025
Mevotech: H512260
WJB: WA512260
Centric: 405.40017E
Vehicle Fitment
HONDA: Element (2003-2005) DX, LX, Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation.
- Non-ABS design for 2003-2005 Honda Element DX and LX models without anti-lock braking systems at the rear axle.
- 80.60 mm inside diameter matches the original bearing envelope on Honda Element rear axles.
- 3 flange bolt holes with M10 x 1.25 knuckle bolt size ensure proper mounting alignment.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930496, Timken BM500000, NTN HUB287-8, and MOOG 512260 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Element (2003-2005) DX and LX models without rear ABS.
- Confirm the 3-bolt flange pattern and 80.60 mm inside diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and flange bolts to manufacturer specifications for the Honda Element platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
