Wheel Hub 512259
The DUHUI Bearing 512259 wheel hub is a direct OE-replacement assembly designed for Honda Civic Si models from 2004 through 2005 and Acura RSX models from 2002 through 2006. This rear wheel hub bearing matches OE references including 42200-S7A-008 and 42200-S2X-J51. It features a Gen 2 hub unit design with 5 wheel studs and a non-integral ABS tone ring, engineered for rear axle applications on these sport compact platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1164 |
| Part Number | 512259 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Inside Diameter | 64.07 mm (2.523 inch) |
| Outside Diameter | 151.70 mm (5.972 inch) |
| Flange Diameter | 151.80 mm (5.976 inch) |
| Flange Offset | 55.25 mm (2.175 inch) |
| Bolt Circle Diameter | 118.00 mm (4.646 inch) |
| Wheel Pilot Diameter | 63.00 mm (2.480 inch) |
| Brake Pilot Diameter | 64.10 mm (2.524 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integral Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1164
OE Numbers: 42200-S7A-008, 42200-S2X-J51, 42200-SCV-A51
Reference Numbers (Interchange):
SKF: BR930382
SKF: VKBA6846
Timken: HA590005
Timken: 512259
NTN: NT512259
NTN: HUB215-9
FAG: 713617960
SNR: R174.58
MOOG: 512259
BCA: 512259
GMB: 735-0010
Mevotech: H512259
Centric: 406.40005E
Raybestos: 712259
Quality-Built: WH512259
WJB: WA512259
Vehicle Fitment
HONDA: Civic (2004-2005) Si, SiR, Hatchback, 2.0L
ACURA: RSX (2002-2006) Base, Type-S, 2.0L
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation.
- Non-integral ABS tone ring design for vehicles with rear anti-lock braking systems – reuses the original sensor where applicable.
- 151.80 mm flange diameter with 5-stud wheel pattern matches the original mounting configuration on Honda Civic Si and Acura RSX rear axles.
- 64.07 mm inside diameter and 151.70 mm outside diameter provide the correct bearing envelope for these sport compact platforms.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930382, Timken HA590005, NTN NT512259, and MOOG 512259 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic (2004-2005) Si, SiR, Hatchback and Acura RSX (2002-2006) models.
- Confirm the 5-stud wheel pattern and 151.80 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench to avoid bearing damage.
- Inspect the ABS tone ring and sensor connector for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
