Wheel Hub 512258
The DUHUI Bearing 512258 wheel hub is a direct OE-replacement assembly designed for Honda Civic Si and SiR models from 2002 through 2005. This rear wheel hub bearing matches OE references including 42200-S5A-J01 and 42200-S5A-008. It features a Gen 3 hub unit design with 4 wheel studs and an integrated ABS tone ring sensor, engineered for rear axle applications on these sport compact platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1163 |
| Part Number | 512258 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inside Diameter | 61.00 mm (2.402 inch) |
| Outside Diameter | 138.70 mm (5.461 inch) |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Brake Pilot Diameter | 61.00 mm (2.402 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1163
OE Numbers: 42200-S5A-J01, 42200-S5A-008, 42200-S5A-A01
Reference Numbers (Interchange):
SKF: BR930381
SKF: VKBA6839
Timken: HA590009
NTN: HUB227-26
NTN: HUB215-9
NTN: HUB227-27
FAG: RW8258
SNR: R174.53
MOOG: 512258
BCA: 512258
GMB: 735-0366
Mevotech: H512258
WJB: WA512258
Centric: 406.40016E
Raybestos: 712258
Vehicle Fitment
HONDA: Civic (2002-2005) Si, SiR, Hatchback, 2.0L
ACURA: RSX (2002-2006) Base, Type-S, 2.0L
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS tone ring into one pre-assembled unit for simplified rear axle installation.
- Integrated ABS sensor with 50-tooth tone ring monitors wheel speed for anti-lock braking systems – no separate sensor installation required.
- 139.00 mm flange diameter with 4-stud wheel pattern and 100.00 mm bolt circle matches the original mounting configuration on Honda Civic Si and Acura RSX rear axles.
- 61.00 mm inside diameter and 138.70 mm outside diameter provide the correct bearing envelope for these sport compact platforms.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930381, NTN HUB227-26, MOOG 512258, and FAG RW8258 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic (2002-2005) Si and SiR models and Acura RSX (2002-2006) models with rear ABS.
- Confirm the 4-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench to avoid bearing damage.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
