Wheel Hub 512256
The DUHUI Bearing 512256 wheel hub is a direct OE-replacement assembly designed for Honda Civic models from 2006 through 2011 and Acura CSX models from 2006 through 2011. This rear wheel hub bearing matches OE references including 42200-SNA-A51 and 42200-SNA-A52. It features a Gen 3 hub unit design with 5 wheel studs and 4 flange bolt holes, engineered for rear axle applications on these compact sedan and coupe platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1161 |
| Part Number | 512256 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inside Diameter | 64.00 mm (2.520 inch) |
| Outside Diameter | 139.00 mm (5.472 inch) |
| Flange Diameter | 139.20 mm (5.480 inch) |
| Flange Offset | 55.20 mm (2.173 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 62.80 mm (2.472 inch) |
| Brake Pilot Diameter | 64.10 mm (2.524 inch) |
| Hub Pilot Diameter | 69.90 mm (2.752 inch) |
| Knuckle Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Knuckle Bolt Hole Size | M10 x 1.25 |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1161
OE Numbers: 42200-SNA-A51, 42200-SNA-A52, 42200-SNA-951, 42200-SNA-952
Reference Numbers (Interchange):
SKF: BR930340
SKF: VKBA 6917
Timken: HA590164
NTN: HUB113T
NTN: HUB113T-5
FAG: RW8256
FAG: 713617970
SNR: R174.72
MOOG: 512256
BCA: 512256
GMB: 735-0353
Mevotech: H512256
Centric: 405.40025E
Raybestos: 712256
WJB: WA512256
Beck/Arnley: 051-6181
Vehicle Fitment
HONDA: Civic (2006-2011) DX, DX-G, GX, LX, LX-S, EX, EX-L, Si, Hybrid, including Coupe and Sedan, 1.8L and 2.0L
ACURA: CSX (2006-2011)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation.
- Non-ABS design for vehicles without anti-lock braking systems at the rear axle.
- 139.20 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Honda Civic and Acura CSX rear axles.
- 69.90 mm hub pilot diameter and 62.80 mm wheel pilot diameter ensure proper wheel centering.
- M10 x 1.25 knuckle bolt holes and 4-bolt flange mounting match the OEM attachment points.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930340, Timken HA590164, NTN HUB113T, and MOOG 512256 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic (2006-2011) and Acura CSX (2006-2011) models without rear ABS.
- Confirm the 5-stud wheel pattern and 4-bolt flange mounting match your vehicle knuckle configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and knuckle bolts to manufacturer specifications – use M10 x 1.25 bolts for the knuckle flange.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
