Wheel Hub 512032
The DUHUI Bearing 512032 wheel hub is a direct OE-replacement assembly designed for Honda Accord models from 1991 through 1993. This rear wheel hub bearing matches OE references including 42200-SM5-A51 and 42200-SV4-N01. It features a Gen 2 hub unit design with 4 wheel studs and an integrated ABS tone ring sensor, engineered for rear axle applications on wagon and sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1030 |
| Part Number | 512032 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 152.00 mm (5.984 inch) |
| Flange Offset | 56.00 mm (2.205 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Brake Pilot Diameter | 64.10 mm (2.524 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| ABS Tone Ring Teeth | 50 |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1030
OE Numbers: 42200-SM5-A51, 42200-SV4-N01, 42200-SV4-N02
Reference Numbers (Interchange):
SKF: BR930126
SKF: VKBA3254
Timken: 512032
NTN: NT512032
MOOG: 512032
BCA: 512032
GMB: 7300393
Mevotech: H512032
Raybestos: 712032
Centric: 406.40012E
Beck/Arnley: 051-6035
WJB: WA512032
Drive Tech America: NT512032
Vehicle Fitment
HONDA: Accord Wagon (1991-1993) with Rear Disc Brakes, Accord Sedan (1992-1993) EX, LX, SE with Rear Disc Brakes
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation.
- Integrated ABS tone ring with 50 teeth monitors wheel speed for anti-lock braking systems – no separate sensor installation required.
- 152.00 mm flange diameter with 4-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Honda Accord rear axles.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930126, Timken 512032, MOOG 512032, and NTN NT512032 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Accord (1991-1993) models with rear disc brakes and 4-wheel ABS.
- Confirm the 4-stud wheel pattern and 152.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Honda Accord platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
