Wheel Hub 512007
The DUHUI Bearing 512007 wheel hub is a direct OE-replacement assembly designed for Daihatsu Charade and Applause models from 1988 through 1999. This rear wheel hub bearing matches OE references including 42410-87701 and 42410-87702. It features a rectangular flange design with 4 wheel studs and 2 flange bolt holes, engineered for rear axle applications on these compact sedan and hatchback platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1009 |
| Part Number | 512007 |
| Position | Rear Axle (Left, Right) |
| Bearing Type | Ball Bearing |
| Flange Diameter | 140.97 mm (5.550 inch) |
| Flange Offset | 56.90 mm (2.240 inch) |
| Bolt Circle Diameter | 100.08 mm (3.940 inch) |
| Wheel Pilot Diameter | 63.25 mm (2.490 inch) |
| Brake Pilot Diameter | 64.26 mm (2.530 inch) |
| Hub Pilot Diameter | 66.04 mm (2.600 inch) |
| Hub Bolt Circle Diameter | 87.88 mm (3.460 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 2 |
| Flange Bolt Hole Size | M6 x 1.0 |
| Flange Shape | Rectangular |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1009
OE Numbers: 42410-87701, 42410-87702, 42410-87702-000
Reference Numbers (Interchange):
SKF: VKBA3295
Timken: 512007
NTN: 28BWK06
KOYO: DACF2027F
BCA: 512007
MOOG: 512007
FAG: 713616230
Mevotech: H512007
WJB: WA512007
Vehicle Fitment
DAIHATSU: Charade (1988-1992) G100, Charade (1990-1993) G102, Charade (1994-1999) G203, Applause (1989-1999) A101, Gran Move (1996-1998) G3
HOLDEN: Applause (1989-1999)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rectangular flange design with 2-bolt mounting matches the OEM attachment pattern on Daihatsu Charade and Applause rear axles.
- 140.97 mm flange diameter with 4-stud wheel pattern and 100.08 mm bolt circle ensures proper wheel mounting.
- M6 x 1.0 flange bolt holes provide secure mounting to the rear knuckle.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA3295, FAG 713616230, and WJB WA512007 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Daihatsu Charade (1988-1999) and Applause (1989-1999) models without rear ABS.
- Confirm the rectangular flange shape and 2-bolt mounting pattern match your vehicle knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and M6 flange bolts to manufacturer specifications for the Daihatsu platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
