Wheel Hub 512149
The DUHUI Bearing 512149 wheel hub is a direct OE-replacement assembly designed for Ford Windstar models from 1997 through 2003. This rear wheel hub bearing matches OE references including F78Z-1104-AA, 1F22-2B664-AB, and F7AZ-1104-AC. It features a Gen 2 hub unit design with 5 wheel studs and an integrated ABS tone ring sensor, engineered for rear axle applications on this minivan platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1059 |
| Part Number | 512149 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Flange Offset | 54.60 mm (2.150 inch) |
| Bolt Circle Diameter | 108.00 mm (4.252 inch) |
| Wheel Pilot Diameter | 63.22 mm (2.489 inch) |
| Brake Pilot Diameter | 64.40 mm (2.535 inch) |
| Hub Pilot Diameter | 73.90 mm (2.910 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| ABS Tone Ring Teeth | 50 |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1059
OE Numbers: F78Z-1104-AA, 1F22-2B664-AB, F7AZ-1104-AC, F88A-2B664-AA, F7AC-2B300-AA
Reference Numbers (Interchange):
SKF: BR930223
Timken: 512149
MOOG: 512149
BCA: 512149
NTN: WE60444
GMB: 760-0090
Mevotech: H512149
Raybestos: 712149
Centric: 406.61011E
Dorman: 951-149
Quality-Built: WH512149
WJB: WA512149
Duralast: DL512149
Vehicle Fitment
FORD: Windstar (1997-2003), Windstar (1997) from 8/4/1997
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation.
- Integrated ABS tone ring with 50 teeth monitors wheel speed for anti-lock braking systems – no separate sensor installation required.
- 139.00 mm flange diameter with 5-stud wheel pattern and 108.00 mm bolt circle matches the original mounting configuration on Ford Windstar rear axles.
- 73.90 mm hub pilot diameter and 63.22 mm wheel pilot diameter ensure proper wheel centering on this minivan platform.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930223, Timken 512149, MOOG 512149, and BCA 512149 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Ford Windstar (1997-2003) models with rear ABS. For 1997 models, verify production date from August 4, 1997.
- Confirm the 5-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Ford Windstar platform – do not use an impact wrench to avoid bearing damage.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
