Wheel Hub 512228
The DUHUI Bearing 512228 wheel hub is a direct OE-replacement assembly designed for Toyota 4Runner (2003-2009), FJ Cruiser (2007-2009), and Lexus GX470 (2003-2009) models. This rear wheel hub bearing matches OE references including 42450-60050, 42450-60060, and 42410-60060. It features a Gen 2 hub unit design with 4 wheel studs and 4 flange bolt holes, engineered for rear axle applications on these SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1135 |
| Part Number | 512228 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 162.05 mm (6.380 inch) |
| Flange Offset | 20.07 mm (0.790 inch) |
| Hub Pilot Diameter | 88.90 mm (3.500 inch) |
| Hub Bolt Circle Diameter | 139.95 mm (5.510 inch) |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | 12.80 mm |
| Flange Shape | Offset Trapezoid |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1135
OE Numbers: 42450-60050, 42450-60060, 42410-60060, 42460-60010, 42460-60020
Reference Numbers (Interchange):
SKF: VKBA6907
SKF: GRW270
Timken: HA590050
NSK: 44BWK02R-Y-2CA17
KOYO: 2DACF044N-4A
BCA: 512228
MOOG: 512228
FAG: RW8228
FAG: 713621210
SNR: R141.21
Mevotech: H512228
GMB: 770-0344
Optimal: 982888
Beck/Arnley: 051-6111
NTN: WB-0253
Vehicle Fitment
TOYOTA: 4Runner (2003-2009), FJ Cruiser (2007-2009)
LEXUS: GX470 (2003-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Toyota and Lexus SUV platforms.
- Non-ABS design for vehicles without rear wheel speed sensor integration at the hub.
- 162.05 mm flange diameter with 4-stud wheel pattern and 139.95 mm hub bolt circle matches the original mounting configuration on 4Runner, FJ Cruiser, and GX470 rear axles.
- Offset trapezoid flange shape with 20.07 mm offset matches the OEM attachment geometry.
- 4 flange bolt holes with 12.80 mm size and 88.90 mm hub pilot diameter ensure proper mounting alignment.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6907, Timken HA590050, KOYO 2DACF044N-4A, and MOOG 512228 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota 4Runner (2003-2009), FJ Cruiser (2007-2009), and Lexus GX470 (2003-2009) models without rear ABS.
- Confirm the 4-stud wheel pattern, offset trapezoid flange shape, and 20.07 mm flange offset match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and flange bolts to manufacturer specifications for the specific vehicle platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly. This bearing assembly requires a press for installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
