Wheel Hub 512225
The DUHUI Bearing 512225 wheel hub is a direct OE-replacement assembly designed for BMW 5 Series E39 models from 1997 through 2003. This rear wheel hub bearing matches OE references including 33411095652 and 33411095774. It features a Gen 2 hub unit design with 4 flange bolt holes and a non-integral ABS encoder, engineered for rear axle applications on these sedan and touring platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1132 |
| Part Number | 512225 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 123.95 mm (4.880 inch) |
| Flange Offset | 37.08 mm (1.460 inch) |
| Bolt Circle Diameter | 105.92 mm (4.170 inch) |
| Wheel Pilot Diameter | 89.92 mm (3.540 inch) |
| Brake Pilot Diameter | 89.92 mm (3.540 inch) |
| Hub Pilot Diameter | 87.88 mm (3.460 inch) |
| Flange Bolt Hole Quantity | 4 |
| Bolt Size | M10 |
| ABS Sensor | Non-Integral Encoder |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1132
OE Numbers: 33411095652, 33411095774, 33411093371
Reference Numbers (Interchange):
SKF: GRW495
SKF: VKBA3445
Timken: 512225
NTN: WE60822
FAG: 713667900
MOOG: 512225
BCA: 512225
Mevotech: H512225
Febi Bilstein: 32803
Optimal: 501605
Ruville: 5044
GMB: 715-0036
Schaeffler: 580494
Vehicle Fitment
BMW: 525i (2001-2003), 528i (1997-2000), 530i (2001-2003), 540i (1997-2003), M5 (2000-2003), 525i Sport Wagon (2001-2003), 528iT (1999-2000), 540iT (1999-2000), 540i Sport Wagon (2001-2003)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on BMW E39 5 Series platforms.
- Non-integral ABS encoder design for vehicles with rear anti-lock braking systems – reuses the original sensor where applicable.
- 123.95 mm flange diameter with 4-bolt flange mounting and 105.92 mm bolt circle matches the original configuration on BMW E39 rear axles.
- 87.88 mm hub pilot diameter and 89.92 mm wheel pilot diameter ensure proper wheel centering.
- 4 flange bolt holes with M10 bolt size and 37.08 mm flange offset match the OEM attachment geometry.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF GRW495, Timken 512225, NTN WE60822, and Schaeffler 580494 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on BMW 5 Series E39 (1997-2003) models, including 525i, 528i, 530i, 540i, M5, and Touring variants.
- Confirm the 4-bolt flange mounting and 105.92 mm bolt circle match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and flange bolts to manufacturer specifications – rear axle nut torque is approximately 230 ft-lb for the E39 platform.
- Inspect the ABS encoder ring and sensor connector for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
