Wheel Hub VKBA6769
The DUHUI Bearing VKBA6769 wheel hub is a direct OE-replacement assembly designed for Jeep Commander (XK) models from 2006 through 2010 and Jeep Grand Cherokee (WK) models from 2005 through 2010. This rear wheel hub bearing matches OE references including 52111884AA and 52111884AB. It features a Gen 3 hub unit design with 5 wheel studs and a 165.00 mm flange diameter, engineered for rear axle applications on these SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0451 |
| Part Number | VKBA6769 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 165.00 mm (6.496 inch) |
| Flange Offset | 63.50 mm (2.500 inch) |
| Bolt Circle Diameter | 127.00 mm (5.000 inch) |
| Wheel Pilot Diameter | 71.40 mm (2.811 inch) |
| Brake Pilot Diameter | 71.90 mm (2.831 inch) |
| Hub Pilot Diameter | 84.80 mm (3.339 inch) |
| Hub Bolt Circle Diameter | 119.40 mm (4.701 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | 1/2-20 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.75 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0451
OE Numbers: 52111884AA, 52111884AB, 52111884AC, 52111884AD
Reference Numbers (Interchange):
SKF: VKBA6769
SKF: BR930461
Timken: HA590141
NTN: HUB194-11
FAG: FW8302
BCA: 512302
MOOG: 512302
Mevotech: H512302
ILJIN: IJ123059
Driveworks: NT512302
GSP: 9230022
Optimal: 962528
Kavo Parts: WBH6584
Bendix: 051171B
Precision: 295-12302
Vehicle Fitment
JEEP: Commander (XK) (2006-2010) RWD, 4WD, Grand Cherokee (WK) (2005-2010) RWD, AWD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Jeep Commander and Grand Cherokee WK platforms.
- Non-ABS design for vehicles without rear wheel speed sensor integration at the hub.
- 165.00 mm flange diameter with 5-stud wheel pattern and 127.00 mm bolt circle matches the original mounting configuration on Commander and Grand Cherokee rear axles.
- 5 wheel studs with 1/2-20 thread and 63.50 mm flange offset match the OEM attachment geometry.
- 4 flange bolt holes with M12 x 1.75 bolt size ensure proper mounting to the rear knuckle.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6769, Timken HA590141, FAG FW8302, and ILJIN IJ123059 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Jeep Commander (XK) (2006-2010) and Jeep Grand Cherokee (WK) (2005-2010) models without rear ABS.
- Confirm the 5-stud wheel pattern and 165.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and M12 x 1.75 flange bolts to manufacturer specifications for the Jeep WK platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
