Wheel Hub G14V2615X
The DUHUI Bearing G14V2615X wheel hub is a direct OE-replacement assembly designed for Mazda 323F/323S (BJ), Protege, MPV, Millenia, and Mazda 6 (GG) models from 1998 through 2006. This rear wheel hub bearing matches OE references including G14V2615X, G14V2615XA, and G14V2615XB. It features a Gen 2 hub unit design with 5 wheel studs and an integrated 44-tooth ABS tone ring, engineered for rear axle applications on these compact car and MPV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0450 |
| Part Number | G14V2615X |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Outer Diameter | 140.00 mm (5.512 inch) |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Flange Offset | 61.00 mm (2.402 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.00 mm (2.638 inch) |
| Brake Pilot Diameter | 72.00 mm (2.835 inch) |
| Hub Pilot Diameter | 78.00 mm (3.071 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| ABS Ring Teeth | 44 |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0450
OE Numbers: G14V2615X, G14V2615XA, G14V2615XB, G14V-26-15X
Reference Numbers (Interchange):
SKF: VKBA3932
Timken: HA590100
NTN: HUB226-15
NTN: HUB226-34
FAG: 713615630
MOOG: 512269
BCA: WE60558
Mevotech: H512269
SNR: R170.42
NIPPARTS: J4713031
A.B.S.: 201326
AUTEX: 802840
SPIDAN: 27460
RUVILLE: 7037
OPTIMAL: 942273
MAPCO: 26292
Vehicle Fitment
MAZDA: 323F VI Hatchback (BJ) (1998-2004), 323S VI Saloon (BJ) (1998-2004), Protege (BJ) (1999-2003), Protege5 (2002-2003), MPV II (LW) (2000-2006), Millenia (2001-2002), Mazda 6 (GG) (2002-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Mazda BJ and GG platforms.
- Integrated ABS tone ring with 44 teeth monitors wheel speed for anti-lock braking systems – no separate sensor installation required.
- 140.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Mazda 323, Protege, MPV, and Millenia rear axles.
- 67.00 mm wheel pilot diameter and 72.00 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA3932, Timken HA590100, NTN HUB226-15, and MOOG 512269 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mazda 323F/323S VI (BJ) (1998-2004), Protege (1999-2003), MPV II (2000-2006), Millenia (2001-2002), and Mazda 6 (GG) (2002-2008) models with rear ABS.
- Confirm the 5-stud wheel pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific Mazda platform – do not use an impact wrench to avoid bearing damage.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
