Wheel Hub VKBA7561
The DUHUI Bearing VKBA7561 wheel hub is a direct OE-replacement assembly designed for Nissan 350Z Coupe (Z33) and 350Z Roadster (Z33) models from 2002 through 2008. This rear wheel hub bearing matches OE references including 40202-AL510 and 40202-AL56C. It features a Gen 2 hub unit design with a 4-hole rim pattern and a 43.00 mm bore diameter, engineered for rear axle applications on this sport coupe and roadster platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0421 |
| Part Number | VKBA7561 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 43.00 mm (1.693 inch) |
| Outer Diameter | 84.00 mm (3.307 inch) |
| Width | 45.00 mm (1.772 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Non-Integral |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0421
OE Numbers: 40202-AL510, 40202-AL56C, 40202-CD000, 43202-CD000
Reference Numbers (Interchange):
SKF: VKBA7561
SKF: BR930636
Timken: 513268
BCA: 513268
MOOG: 513268
NTN: HUB170-5
NSK: 43BWK03
FAG: 713615640
SNR: R168.92
GMB: 735-0393
Mevotech: H513268
GSP: 9232005
Optimal: 961807
Kavo Parts: WBH6509
Blueprint: ADN18259
Febest: 0292-Z33
Vehicle Fitment
NISSAN: 350Z Coupe (Z33) (2002-2008) 3.5, 350Z Roadster (Z33) (2003-2009) 3.5
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on the Nissan Z33 platform.
- 43.00 mm inner diameter, 84.00 mm outer diameter, and 45.00 mm width match the original bearing envelope on Nissan 350Z rear axles.
- 4-hole rim pattern matches the OEM wheel mounting configuration on the 350Z Coupe and Roadster.
- Non-integral ABS sensor design for vehicles with rear anti-lock braking systems – reuses the original sensor where applicable.
- Angular ball bearing design provides stable load distribution under cornering loads for this sport coupe platform.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7561, Timken 513268, NTN HUB170-5, and NSK 43BWK03 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan 350Z Coupe (Z33) (2002-2008) and 350Z Roadster (Z33) (2003-2009) models.
- Confirm the 4-hole rim pattern and 84.00 mm outer diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and hub mounting bolts to Nissan service manual specifications for the Z33 platform.
- Inspect the ABS sensor and tone ring for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
