Wheel Hub VKBA7560
The DUHUI Bearing VKBA7560 wheel hub is a direct OE-replacement assembly designed for Nissan 350Z Coupe and Convertible (Z33) models from 2002 through 2009 and Infiniti G35 models from 2003 through 2007. This front wheel hub bearing matches OE references including 40202-CD000 and 40202-AL500. It features a Gen 3 hub unit design with 5 wheel studs, a 136.00 mm flange diameter, and an integrated ABS sensor, engineered for front axle applications on these sport coupe and sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0420 |
| Part Number | VKBA7560 |
| Position | Front Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Angular Ball Bearing |
| Flange Diameter | 136.00 mm (5.354 inch) |
| Flange Offset | 40.74 mm (1.604 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Hub Bolt Circle Diameter | 107.00 mm (4.213 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.25 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0420
OE Numbers: 40202-CD000, 40202-AL500, 40202-AL505, 40202-CD00A
Reference Numbers (Interchange):
SKF: VKBA7560
SKF: BR930625
SNR: R168.83
Timken: 513267
BCA: 513267
MOOG: 513267
NTN: HUB188-11
NSK: 45BWK01
FAG: 713615610
GMB: 735-0394
Mevotech: H513267
GSP: 9232004
Optimal: 961806
Kavo Parts: WBH6508
Blueprint: ADN18255
Febest: 0292-Z33F
Vehicle Fitment
NISSAN: 350Z Coupe (Z33) (2002-2009) 3.5, 350Z Roadster (Z33) (2003-2009) 3.5
INFINITI: G35 (2003-2007) V6 3.5L, including Sedan and Coupe
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS sensor into one pre-assembled unit for simplified front axle installation on the Nissan Z33 and Infiniti G35 platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 136.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on 350Z and G35 front axles.
- 84.00 mm hub pilot diameter and 66.00 mm wheel pilot diameter ensure proper wheel centering.
- 5 wheel studs with M12 x 1.25 thread and 4 flange bolt holes ensure secure wheel and hub mounting.
- Angular ball bearing design provides stable load distribution under cornering loads for these sport platforms.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7560, SNR R168.83, Timken 513267, and NTN HUB188-11 ensure accurate replacement sourcing.
Installation Notes
- This hub is for front axle applications on Nissan 350Z Coupe and Roadster (Z33) (2002-2009) and Infiniti G35 (2003-2007) models with front ABS.
- Confirm the 5-stud wheel pattern and 136.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and M12 x 1.25 flange bolts to Nissan service manual specifications for the Z33 platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
