Wheel Hub VKBA7529
The DUHUI Bearing VKBA7529 wheel hub is a direct OE-replacement assembly designed for Toyota Camry (_V1_) models from 1991 through 1997 and Camry (_V2_) models from 1996 through 2001. This rear wheel hub bearing matches OE references including 42409-06010, 42450-33010, and 42450-33020. It features a Gen 3 hub unit design with 5 wheel studs, a 152.00 mm flange diameter, and an integrated 48-tooth ABS ring, engineered for rear axle applications on these sedan and estate platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0414 |
| Part Number | VKBA7529 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Wheel Hub Assembly with Integrated Bearing |
| Outer Diameter | 152.00 mm (5.984 inch) |
| Height | 109.50 mm (4.311 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Rim Hole Number | 5 |
| Number of Joint Flanges | 4 |
| Thread Size | M12 x 1.5 |
| ABS Sensor | Integrated ABS Ring |
| ABS Ring Teeth | 48 |
| Weight | 3.20 kg (7.05 lbs) |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0414
OE Numbers: 42409-06010, 42450-33010, 42450-33020, 42410-33040, 42410-33020, 42409-32020
Reference Numbers (Interchange):
SKF: VKBA7529
SKF: BR930275
SNR: R168.90
Timken: 512020
NTN: HUB058-28
NSK: 45BWK01
FAG: 713620290
BCA: 512020
MOOG: 512020
GMB: 735-0315
Mevotech: H512020
Optimal: 962716
Kavo Parts: WBH6513
Blueprint: ADT38326
Febest: 0182-V10R
Japanparts: KK-22030
Vehicle Fitment
TOYOTA: Camry (_V1_) (1991-1997) 2.2, 2.2 I4, 3.0 XLE SFI, Camry (_V1_) Station Wagon (1991-1996), Camry (_V2_) (1996-2001) 3.0 24V, Camry Estate (_V2_) (1996-2001) 3.0 Vienta
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel hub assembly with integrated bearing for simplified rear axle installation on Toyota Camry V1 and V2 platforms.
- Integrated ABS ring with 48 teeth monitors wheel speed for anti-lock braking systems.
- 152.00 mm outer diameter with 5-hole rim pattern and 114.30 mm bolt circle matches the original mounting configuration on Camry rear axles.
- 109.50 mm height provides the correct bearing and hub offset for these sedan and estate platforms.
- 4 joint flanges with M12 x 1.5 thread ensure secure mounting to the rear axle carrier.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7529, SNR R168.90, Timken 512020, and NTN HUB058-28 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Camry (_V1_) (1991-1997) and Camry (_V2_) (1996-2001) models with rear ABS.
- Confirm the 5-hole rim pattern and 152.00 mm outer diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and joint flange bolts to Toyota service manual specifications for the respective platform.
- Inspect the ABS ring and sensor connector for damage before installation, as this hub includes an integrated ABS ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
