Wheel Hub 512199
The DUHUI Bearing 512199 wheel hub is a direct OE-replacement assembly designed for Hyundai Tiburon models from 2003 through 2008. This rear wheel hub bearing matches OE references including 52730-2C100 and 52730-2C000. It features a Gen 2 hub unit design with 5 wheel studs, a 139.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on this sport coupe platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1109 |
| Part Number | 512199 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Flange Offset | 50.55 mm (1.990 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 75.95 mm (2.990 inch) |
| Hub Pilot Diameter | 73.90 mm (2.910 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1109
OE Numbers: 52730-2C100, 52730-2C000, 52730-2D000, 52730-2D100
Reference Numbers (Interchange):
SKF: VKBA6813
SKF: BR930599
Timken: 512199
BCA: 512199
MOOG: 512199
NTN: NT512199
FAG: RW8199
SNR: R184.20
GMB: 735-0392
Mevotech: H512199
Raybestos: 712199
Centric: 406.51005
Beck/Arnley: 051-6147
WJB: WA512199
Precision: 295-12199
Vehicle Fitment
HYUNDAI: Tiburon (GK) (2003-2008) 2.0 i, 2.7 V6, Coupe (GK) (2003-2009) 2.0, 2.7
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on the Hyundai Tiburon GK platform.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 139.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Tiburon rear axles.
- 67.06 mm wheel pilot diameter and 75.95 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6813, SKF BR930599, Timken 512199, and MOOG 512199 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Tiburon (GK) (2003-2008) and Hyundai Coupe (GK) (2003-2009) models without rear ABS.
- Confirm the 5-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Hyundai GK platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
