Wheel Hub 512193
The DUHUI Bearing 512193 wheel hub is a direct OE-replacement assembly designed for Hyundai Accent Hatchback and Sedan (LC) models from 1999 through 2006 and Kia Chollima models from 2002 through 2007. This rear wheel hub bearing matches OE references including 52710-02000 and 52710-02010. It features a Gen 2 hub unit design with 4 wheel studs, a 140.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these compact sedan and hatchback platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1103 |
| Part Number | 512193 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Flange Offset | 50.55 mm (1.990 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 54.10 mm (2.130 inch) |
| Brake Pilot Diameter | 62.48 mm (2.460 inch) |
| Hub Pilot Diameter | 70.10 mm (2.760 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1103
OE Numbers: 52710-02000, 52710-02010, 52710-02020
Reference Numbers (Interchange):
SKF: BR930317
Timken: 512193
BCA: 512193
MOOG: 512193
NTN: NT512193
FAG: RW8193
SNR: R184.19
GMB: 735-0398
Mevotech: H512193
Raybestos: 712193
Centric: 406.51010
Beck/Arnley: 051-6153
WJB: WA512193
Precision: 295-12193
Driveworks: 512193
Vehicle Fitment
HYUNDAI: Accent Hatchback (LC) (1999-2005) 1.3, 1.5, Non-ABS, Accent Sedan (LC) (1999-2006) 1.3, 1.5, 1.6, Non-ABS
KIA: Chollima (2002-2007) Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Hyundai Accent LC and Kia Chollima platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 140.00 mm flange diameter with 4-stud wheel pattern and 100.00 mm bolt circle matches the original mounting configuration on Accent and Chollima rear axles.
- 54.10 mm wheel pilot diameter and 62.48 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930317, Timken 512193, MOOG 512193, and NTN NT512193 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Accent Hatchback and Sedan (LC) (1999-2006) and Kia Chollima (2002-2007) models without rear ABS.
- Confirm the 4-stud wheel pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Hyundai LC platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
