Wheel Hub 512166
The DUHUI Bearing 512166 wheel hub is a direct OE-replacement assembly designed for Honda CR-V (RD) models from 1995 through 2002. This rear left wheel hub bearing matches OE references including 42200-S10-008 and 42200-S10-A01. It features a Gen 2 hub unit design with a 4.72 inch hub bolt circle diameter, a 3-bolt mounting flange, and a non-ABS configuration, engineered for the left (driver) side rear axle on this compact SUV platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1076 |
| Part Number | 512166 |
| Position | Rear Axle, Left (Driver Side) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Hub Pilot Diameter | 84.07 mm (3.310 inch) |
| Hub Bolt Circle Diameter | 119.89 mm (4.720 inch) |
| Flange Bolt Hole Quantity | 3 |
| Flange Bolt Hole Size | M12 x 1.25 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1076
OE Numbers: 42200-S10-008, 42200-S10-A01, 42200-S10-018
Reference Numbers (Interchange):
SKF: VKBA6858
SKF: BR930231
Timken: 512166
BCA: 512166
MOOG: 512166
NTN: NT512166
FAG: RW8166
GMB: 730-0305
Mevotech: H512166
Raybestos: 712166
Centric: 405.40008
WJB: WA512166
Beck/Arnley: 051-6120
Precision: 295-12166
Duralast: DL512166
Vehicle Fitment
HONDA: CR-V (RD) (1995-2002) 2.0 16V, 2.0 i VTEC, including RD1, RD2, RD3, Rear Left
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on the Honda CR-V RD platform.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 119.89 mm hub bolt circle diameter with 3-bolt mounting flange and M12 x 1.25 bolt size matches the original mounting configuration on CR-V RD rear left axles.
- 84.07 mm hub pilot diameter ensures proper wheel and hub alignment.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6858, SKF BR930231, Timken 512166, and MOOG 512166 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear left (driver side) applications on Honda CR-V (RD) (1995-2002) models without rear ABS. For the rear right (passenger side), verify the corresponding part number.
- Confirm the 3-bolt flange pattern and 84.07 mm hub pilot diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and M12 x 1.25 flange bolts to Honda service manual specifications for the CR-V RD platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
