Wheel Hub VKBA6939
The DUHUI Bearing VKBA6939 wheel hub is a direct OE-replacement assembly designed for Hyundai Santa Fe (SM) models from 2000 through 2006 and Hyundai Trajet (FO) MPV models from 2000 through 2008. This rear wheel hub bearing matches OE references including 52710-3A000, 52710-3A001, and 52710-26000. It features a Gen 2 hub unit design with 5 wheel studs, a 148.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these SUV and MPV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0360 |
| Part Number | VKBA6939 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 56.20 mm (2.213 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 75.95 mm (2.990 inch) |
| Hub Pilot Diameter | 78.00 mm (3.071 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0360
OE Numbers: 52710-3A000, 52710-3A001, 52710-26000, 52710-26010
Reference Numbers (Interchange):
SKF: VKBA6939
SKF: BR930478
FAG: 713626580
SNR: R184.31
Timken: 512197
BCA: 512197
MOOG: 512197
NTN: NT512197
GMB: 735-0389
Mevotech: H512197
Raybestos: 712197
Centric: 406.51003
WJB: WA512197
Precision: 295-12197
Spidan: 27772
Vehicle Fitment
HYUNDAI: Santa Fe (SM) (2000-2006) 2.0, 2.4, 2.7 V6, FWD Non-ABS, Trajet (FO) MPV (2000-2008) 2.0, 2.0 CRDi, 2.7 V6, Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Hyundai Santa Fe SM and Trajet FO platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 148.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Santa Fe and Trajet rear axles.
- 67.06 mm wheel pilot diameter and 75.95 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6939, SKF BR930478, FAG 713626580, and SNR R184.31 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Santa Fe (SM) (2000-2006) FWD Non-ABS and Trajet (FO) MPV (2000-2008) models without rear ABS.
- Confirm the 5-stud wheel pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Hyundai SM or FO platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
