Wheel Hub 512160
The DUHUI Bearing 512160 wheel hub is a direct OE-replacement assembly designed for Hyundai Elantra models from 1996 through 2000 and Hyundai Tiburon models from 1997 through 2001. This rear wheel hub bearing matches OE references including 52730-29000 and 52730-29010. It features a Gen 2 hub unit design with 4 wheel studs, a 139.00 mm flange diameter, and an integrated ABS tone ring, engineered for rear axle applications on these compact sedan and coupe platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1070 |
| Part Number | 512160 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Flange Offset | 46.74 mm (1.840 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 75.95 mm (2.990 inch) |
| Hub Pilot Diameter | 67.06 mm (2.640 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1070
OE Numbers: 52730-29000, 52730-29010, 52730-29001
Reference Numbers (Interchange):
SKF: BR930270
Timken: 512160
BCA: 512160
MOOG: 512160
NTN: NT512160
FAG: RW8160
GMB: 735-0402
Mevotech: H512160
Raybestos: 712160
Centric: 406.51014
Beck/Arnley: 051-6157
WJB: WA512160
Precision: 295-12160
Driveworks: 512160
Duralast: DL512160
Vehicle Fitment
HYUNDAI: Elantra (J2) (1996-2000) 1.6, 1.8, Tiburon (RD) (1997-2001) 1.6, 1.8, 2.0
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Hyundai Elantra J2 and Tiburon RD platforms.
- Integrated ABS tone ring monitors wheel speed for anti-lock braking systems.
- 139.00 mm flange diameter with 4-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Elantra and Tiburon rear axles.
- 67.06 mm wheel pilot diameter and 75.95 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930270, Timken 512160, MOOG 512160, and NTN NT512160 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Elantra (J2) (1996-2000) and Tiburon (RD) (1997-2001) models with rear ABS.
- Confirm the 4-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Hyundai J2 or RD platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
