Wheel Hub VKBA6928
The DUHUI Bearing VKBA6928 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Lancer Sedan models from 2000 through 2013, Lancer Station Wagon models from 2003 through 2008, and Outlander (CU_) models from 2001 through 2008. This rear wheel hub bearing matches OE references including MR527453 and 3785A018. It features a Gen 2 hub unit design with 5 wheel studs, a 137.50 mm flange diameter, and an integrated ABS sensor, engineered for rear axle applications on these sedan, wagon, and SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0359 |
| Part Number | VKBA6928 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 137.50 mm (5.413 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 89.99 mm (3.543 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0359
OE Numbers: MR527453, 3785A018, MR493619, MR403730
Reference Numbers (Interchange):
SKF: VKBA6928
SKF: BR930445
FAG: 713619760
SNR: R173.50
NTN: HUB213-22
KOYO: 3DACF026F
Timken: HA590205
BCA: 512270
MOOG: 512270
GMB: 735-0317
Mevotech: H512270
Optimal: 962611
Blueprint: ADC48340
Febest: 0482-CJ5R
Japanparts: KK-22035
Nipparts: J4715033
Vehicle Fitment
MITSUBISHI: Lancer Sedan (CS_A, CT_A) (2000-2013) 1.3, 1.6, 1.8, 2.0, 2.4, Lancer Station Wagon (CS_W, CT_W) (2003-2008) 1.6, 1.8, 2.0, 2.4, Lancer Sportback (2004), Outlander (CU_) (2001-2008) 2.0, 2.4, 2.4 4G64, 2.4 4G69
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Mitsubishi Lancer CS/CT and Outlander CU platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 137.50 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Lancer and Outlander rear axles.
- 67.06 mm wheel pilot diameter and 89.99 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6928, FAG 713619760, SNR R173.50, and NTN HUB213-22 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Lancer Sedan (2000-2013), Lancer Station Wagon (2003-2008), Lancer Sportback (2004), and Outlander (2001-2008) models with rear ABS.
- Confirm the 5-stud wheel pattern and 137.50 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Mitsubishi service manual specifications for the Lancer CS/CT or Outlander CU platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
