Wheel Hub VKBA6914
The DUHUI Bearing VKBA6914 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Pajero III (V6_W, V7_W) models from 2000 through 2006, Pajero IV (V8_W, V9_W) models from 2006 through 2021, and Pajero Classic (V2_W, V6_W, V7_W) models from 2006 onward. This front wheel hub bearing matches OE references including 3880A012, 3880A013, 3880A024, and MR961910. It features a Gen 3 hub unit design with 6 wheel studs, a 169.00 mm flange diameter, and a complete kit including hub assembly, retaining nut, plate, and split pin, engineered for front axle applications on these full-size SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKBA6914 |
| Position | Front Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 169.00 mm (6.654 inch) |
| Rim Hole Number | 6 |
| Kit Contents | Hub x 1, Nut x 1, Plate x 1, Split Pin x 1 |
| ABS Sensor | Compatible with ABS and non-ABS variants |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 3880A012, 3880A013, 3880A024, 3885A103, MN103586, MR455620, MR594954, MR961910
Reference Numbers (Interchange):
SKF: VKBA 6914
SKF: BR930441
FAG: FW774
Timken: HA590145
BCA: 515074
NSK: 50KWH01
Optimal: 952755
Febest: 0482-V73F
Japanparts: KK-22052
Nipparts: J4715055
Vehicle Fitment
MITSUBISHI: Pajero III (V6_W, V7_W) (2000-2006) 2.5 TDi, 3.0 V6, 3.2 DI-D, 3.5 V6, Pajero III Canvas Top (V6_W, V7_W) (2000-2006) 2.4, Pajero IV (V8_W, V9_W) (2006-2021) 3.0 V6, 3.2 DI-D, 3.8 V6, Montero III (2000-2006), Montero IV (2006-2021), Shogun III (2000-2006), Shogun IV (2006-2021)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes hub assembly, retaining nut, plate, and split pin for a full installation on Mitsubishi Pajero III, IV, and Classic platforms.
- 169.00 mm flange diameter with 6-hole rim pattern matches the original mounting configuration on Pajero front axles.
- Compatible with both ABS and non-ABS variants for broad application coverage.
- Heavy-duty design engineered for the demands of 4WD and off-road vehicle applications.
- Pre-set, pre-lubricated, and sealed hub unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6914, FAG FW774, Timken HA590145, and BCA 515074 ensure accurate replacement sourcing.
Installation Notes
- This kit is for front axle applications on Mitsubishi Pajero III (2000-2006), Pajero IV (2006-2021), Pajero Classic (2006-), and Montero and Shogun variants with 4WD.
- Confirm the 6-hole rim pattern and 169.00 mm flange diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Mitsubishi service manual specifications for the Pajero platform. Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
- This kit covers one wheel. Order two for a full front axle replacement.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
