Wheel Hub 512018
The DUHUI Bearing 512018 wheel hub is a direct OE-replacement assembly designed for Toyota Corolla (_E10_, _E11_) models from 1993 through 2002 and Chevrolet Prizm models from 1998 through 2002. This rear wheel hub bearing matches OE references including 42450-02030, 42450-12030, and 7466994. It features a Gen 2 hub unit design with 4 wheel studs, a 140.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these compact sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1018 |
| Part Number | 512018 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Flange Offset | 74.70 mm (2.941 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 54.00 mm (2.126 inch) |
| Brake Pilot Diameter | 55.00 mm (2.165 inch) |
| Hub Pilot Diameter | 61.00 mm (2.402 inch) |
| Hub Bolt Circle Diameter | 97.00 mm (3.819 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | 11.00 mm |
| Flange Shape | Offset Trapezoid |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1018
OE Numbers: 42450-02030, 42450-12030, 42450-02050, 42450-12040, 7466994
Reference Numbers (Interchange):
SKF: BR930337
SKF: VKBA7555
Timken: 512018
BCA: 512018
MOOG: 512018
NTN: NT512018
FAG: RW818
KOYO: DACF1050B-5
GMB: 770-0204
Mevotech: H512018
Raybestos: 712018
Centric: 406.44006
WJB: WA512018
Beck/Arnley: 051-6159
Precision: 295-12018
Vehicle Fitment
TOYOTA: Corolla (_E10_) (1992-1997) 1.3 12V, 1.3 XLI, 1.6, 2.0 D, Corolla Compact (_E10_) (1992-1995), Corolla Estate (_E11_) (1997-2000), Corolla Liftback (_E10_) (1992-1999), Corolla (_E11_) (1995-2002), Non-ABS
CHEVROLET: Prizm (1998-2002) Non-ABS
GEO: Prizm (1993-1997) Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Toyota Corolla E10 and E11 platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 140.00 mm flange diameter with 4-stud wheel pattern and 100.00 mm bolt circle matches the original mounting configuration on Corolla and Prizm rear axles.
- Offset trapezoid flange shape with 4 flange bolt holes and 11.00 mm bolt size matches the OEM attachment geometry.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930337, SKF VKBA7555, Timken 512018, and KOYO DACF1050B-5 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Corolla (_E10_, _E11_) (1992-2002), Chevrolet Prizm (1998-2002), and Geo Prizm (1993-1997) models without rear ABS.
- Confirm the 4-stud wheel pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and flange bolts to manufacturer specifications for the specific Toyota platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
