Wheel Hub 512016
The DUHUI Bearing 512016 wheel hub is a direct OE-replacement assembly designed for Nissan Altima models from 1993 through 2001, Nissan Stanza models from 1990 through 1992, Nissan Axxess models from 1990 through 1991, Nissan Prairie Pro MPV (M11) models from 1988 through 1998, and Nissan Primera Wagon (W10) models from 1990 through 1998. This rear wheel hub bearing matches OE references including 43200-0E000 and 43200-30R00. It features a Gen 2 hub unit design with 4 wheel studs, a 148.40 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these sedan, wagon, and MPV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1017 |
| Part Number | 512016 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 148.40 mm (5.843 inch) |
| Flange Offset | 49.00 mm (1.929 inch) |
| Bolt Circle Diameter | 137.16 mm (5.400 inch) |
| Wheel Pilot Diameter | 65.93 mm (2.596 inch) |
| Brake Pilot Diameter | 67.97 mm (2.676 inch) |
| Hub Pilot Diameter | 73.30 mm (2.886 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1017
OE Numbers: 43200-0E000, 43200-30R00, 43200-30R01, 43200-0E001
Reference Numbers (Interchange):
SKF: BR930313
Timken: 512016
BCA: 512016
MOOG: 512016
NTN: HUB042-32
NTN: NT512016
FAG: RW816
GMB: 750-0105
Mevotech: H512016
Raybestos: 712016
Centric: 405.42001
WJB: WA512016
Beck/Arnley: 051-6089
Precision: 295-12016
Duralast: DL512016
Vehicle Fitment
NISSAN: Altima (1993-2001) 2.4, Non-ABS, Axxess (1990-1991) FWD, Stanza (1990-1992) 2.4, Prairie Pro MPV (M11) (1988-1998), Primera Wagon (W10) (1990-1998), Bluebird (U12) (1987-1992), Stanza Wagon (1986-1990)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Nissan Altima, Stanza, Axxess, Prairie, and Primera Wagon platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 148.40 mm flange diameter with 4-stud wheel pattern and 137.16 mm bolt circle matches the original mounting configuration on these Nissan rear axles.
- 65.93 mm wheel pilot diameter and 67.97 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread and 49.00 mm flange offset match the OEM attachment geometry.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930313, Timken 512016, MOOG 512016, and NTN HUB042-32 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Altima (1993-2001), Axxess (1990-1991), Stanza (1990-1992), Prairie Pro MPV (M11) (1988-1998), and Primera Wagon (W10) (1990-1998) models without rear ABS.
- Confirm the 4-stud wheel pattern and 148.40 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific Nissan platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
