Wheel Hub 512014
The DUHUI Bearing 512014 wheel hub is a direct OE-replacement assembly designed for Nissan 240SX models from 1989 through 1998 and Nissan 300ZX models from 1989 through 1990. This rear wheel hub bearing matches OE references including 43210-35F01, 43210-AA000, and 43210-AA100. It features a Gen 2 hub unit design with 4 wheel studs, a 148.40 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these sport coupe platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1016 |
| Part Number | 512014 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inner Diameter | 43.00 mm (1.693 inch) |
| Outer Diameter | 75.00 mm (2.953 inch) |
| Width | 56.00 mm (2.205 inch) |
| Flange Diameter | 148.40 mm (5.843 inch) |
| Bolt Circle Diameter | 137.16 mm (5.400 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1016
OE Numbers: 43210-35F01, 43210-35F06, 43210-35F11, 43210-AA000, 43210-AA010, 43210-AA100
Reference Numbers (Interchange):
SKF: GRW261
SKF: VKBA3310
Timken: 512014
BCA: 512014
MOOG: 512014
NTN: NT512014
GMB: 750-1030
Mevotech: H512014
Raybestos: 712014
Centric: 405.42016E
WJB: WA512014
Beck/Arnley: 051-4009
CR: CR7027
Quality-Built: WH512014
MasterPro: 512014
Vehicle Fitment
NISSAN: 240SX (1989-1998) 2.4L L4, 300ZX (1989-1990) 3.0L V6, Rear Axle Left and Right
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Nissan S13 and Z32 platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems at the hub.
- 43.00 mm inner diameter, 75.00 mm outer diameter, and 56.00 mm width match the original bearing envelope on 240SX and 300ZX rear axles.
- 148.40 mm flange diameter with 4-stud wheel pattern and 137.16 mm bolt circle matches the original mounting configuration.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF GRW261, SKF VKBA3310, Timken 512014, and MOOG 512014 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan 240SX (1989-1998) and 300ZX (1989-1990) models without rear ABS at the hub.
- Confirm the 4-stud wheel pattern and 148.40 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific Nissan platform. Do not use an impact wrench to tighten the axle nut.
- This bearing assembly requires a press for installation. The hub must be pressed onto the spindle using a hydraulic press.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
