Wheel Hub 512010
The DUHUI Bearing 512010 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Eclipse Coupe (D2_A) models from 1989 through 1995, Mitsubishi Sigma Sedan (F16A) models from 1990 through 1996, Mitsubishi Diamante models from 1992 through 1996, Plymouth Laser models from 1990 through 1994 with FWD and non-ABS, and Eagle Talon models from 1990 through 1994 with FWD and non-ABS. This rear wheel hub bearing matches OE references including MB515442, MB584789, and MB948027. It features a Gen 2 hub unit design with 5 wheel studs, a 140.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these coupe, sedan, and wagon platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1012 |
| Part Number | 512010 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Bolt Circle Diameter | 114.05 mm (4.490 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 90.17 mm (3.550 inch) |
| Hub Pilot Diameter | 71.00 mm (2.795 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1012
OE Numbers: MB515442, MB584789, MB948027, MB584790
Reference Numbers (Interchange):
SKF: BR930038
Timken: 512010
BCA: 512010
MOOG: 512010
NTN: NT512010
FAG: RW810
KOYO: DACF1091
GMB: 735-0310
Mevotech: H512010
Raybestos: 712010
Centric: 405.46002
WJB: WA512010
Beck/Arnley: 051-6019
Precision: 295-12010
Duralast: DL512010
Vehicle Fitment
MITSUBISHI: Eclipse Coupe (D2_A) (1989-1995) 1.8, 2.0, 2.0 Turbo, Sigma Sedan (F16A) (1990-1996) 2.0, 3.0 V6, Diamante (1992-1996) 3.0 V6
EAGLE: Talon (1990-1994) FWD, Non-ABS
PLYMOUTH: Laser (1990-1994) FWD, Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Mitsubishi D2_A, F16A, and Diamante platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems at the hub.
- 140.00 mm flange diameter with 5-stud wheel pattern and 114.05 mm bolt circle matches the original mounting configuration on Eclipse, Sigma, Diamante, and Talon rear axles.
- 67.06 mm wheel pilot diameter and 90.17 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930038, Timken 512010, MOOG 512010, and KOYO DACF1091 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Eclipse (1989-1995), Sigma (1990-1996), Diamante (1992-1996), Eagle Talon (1990-1994) FWD Non-ABS, and Plymouth Laser (1990-1994) FWD Non-ABS models.
- Confirm the 5-stud wheel pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
