Wheel Hub 435020K030
The DUHUI Bearing 435020K030 wheel hub is a direct OE-replacement assembly designed for Toyota Hilux (N1, N2, N3) and Fortuner (N5, N6) models from 2004 through 2015. This front wheel hub bearing matches OE references including 43502-0K030 and 90369-T0003. It features a Gen 3 hub unit design with 6 wheel studs, engineered for front axle applications on these pickup and SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0514 |
| Part Number | 435020K030 |
| Position | Front Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing, Double Row |
| Wheel Stud Quantity | 6 |
| ABS Sensor | Non-Integrated (without ABS ring) |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0514
OE Numbers: 43502-0K030, 43550-0K030, 90369-T0003
Reference Numbers (Interchange):
SKF: VKBA 6947
SKF: BR930865
Timken: HA590151
NTN: HUB295-3
NSK: 54KWH01
FAG: 713621180
KOYO: DACF1037
BCA: 512406
MOOG: 512406
GMB: 740-0035
Mevotech: H512406
Febest: 0182-GGN15F
Japanparts: KK-22054
Nipparts: N4712030
Blueprint: ADT38327
Vehicle Fitment
TOYOTA: Hilux VII Pickup (N1, N2, N3) (2004-2015) 2.5 D-4D, 2.7 VVT-i, 3.0 D-4D, Hilux Platform/Chassis (2005-) 2.5 D-4D, 3.0 D-4D, Fortuner (N5, N6) (2004-2015) 2.5 D-4D, 2.7 VVT-i, 3.0 D-4D
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing and flange into one pre-assembled unit for simplified front axle installation on Toyota Hilux and Fortuner platforms.
- Non-integrated ABS design for vehicles without front wheel speed sensor integration at the hub.
- 6 wheel studs ensure proper wheel mounting and torque distribution for these pickup and SUV applications.
- High-strength forged steel hub construction with precision sealed bearing unit matches the original load requirements.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to NSK 54KWH01, Febest 0182-GGN15F, and Blueprint ADT38327 ensure accurate replacement sourcing.
Installation Notes
- This hub is for front axle applications on Toyota Hilux VII (N1, N2, N3) (2004-2015) and Fortuner (N5, N6) (2004-2015) models without front ABS at the hub.
- Confirm the 6-stud wheel pattern and flange dimensions match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and mounting bolts to Toyota service manual specifications for the Hilux or Fortuner platform.
- This is a front axle hub for both left and right sides. Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
