Wheel Hub VKBA7625
The DUHUI Bearing VKBA7625 wheel hub is a direct OE-replacement assembly designed for Hyundai Elantra (MD, UD) models from 2010 through 2015 and Hyundai Veloster (FS) models from 2011 through 2017. This rear wheel hub bearing matches OE references including 52710-3X000 and 52710-3X100. It features a Gen 3 hub unit design with 5 wheel studs, a 138.90 mm flange diameter, and an integrated ABS sensor, engineered for rear axle applications on these compact sedan and hatchback platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0513 |
| Part Number | VKBA7625 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 69.00 mm (2.717 inch) |
| Outer Diameter 1 | 76.00 mm (2.992 inch) |
| Flange Diameter | 138.90 mm (5.469 inch) |
| Hub Diameter | 67.10 mm (2.642 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Width | 59.00 mm (2.323 inch) |
| Wheel Stud Quantity | 5 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0513
OE Numbers: 52710-3X000, 52710-3X100, 52710-3X200, 52750-3X000
Reference Numbers (Interchange):
SKF: VKBA7625
SKF: BR930846
Timken: HA590455
FAG: 713621330
SNR: R184.37
NTN: HUB289-11
NSK: 45BWKH03
BCA: 512436
MOOG: 512436
GMB: 7480103
Mevotech: H512436
Optimal: 922244
Kavo Parts: WBH-4520
Febest: 2282-ELMR
Japanparts: KK-22063
Blueprint: ADG08379
Vehicle Fitment
HYUNDAI: Elantra (MD, UD) (2010-2015) 1.6, 1.8, 2.0, including Sedan and Coupe, Veloster (FS) (2011-2017) 1.6, 1.6 T-GDI, including Turbo and non-Turbo
KIA: Forte (YD) (2013-2018) 1.6, 2.0, Forte Koup (2014-2016)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS sensor into one pre-assembled unit for simplified rear axle installation on Hyundai Elantra MD and Veloster FS platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 138.90 mm flange diameter with 5-bolt wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Elantra and Veloster rear axles.
- 67.10 mm hub diameter and 59.00 mm width provide the correct bearing envelope for these compact platforms.
- Angular ball bearing design provides stable load distribution for rear axle applications.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7625, SKF BR930846, Timken HA590455, and FAG 713621330 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Elantra (MD, UD) (2010-2015), Hyundai Veloster (FS) (2011-2017), and Kia Forte (YD) (2013-2018) models with rear ABS.
- Confirm the 5-bolt wheel pattern and 138.90 mm flange diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and wheel bolts to Hyundai or Kia service manual specifications for the respective chassis.
- Handle the hub assembly with care to avoid contamination or damage to the integrated ABS sensor ring during installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
