Wheel Hub VKBA7451
The DUHUI Bearing VKBA7451 wheel hub is a direct OE-replacement assembly designed for Mitsubishi L200 / Triton (K5_T, K6_T, K7_T) models from 2004 through 2015 and Fiat Fullback (502_, 503_) models from 2016 onward. This front wheel hub bearing matches OE references including MR992374, 2466832, and 951715. It features a wheel bearing kit design with a 50.00 mm inner diameter, an 88.00 mm outer diameter, and a 55.00 mm width, engineered for front axle applications on these pickup platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0404 |
| Part Number | VKBA7451 |
| Position | Front Axle (Left, Right) |
| Bearing Type | Wheel Bearing Kit |
| Inner Diameter | 50.00 mm (1.969 inch) |
| Outer Diameter | 88.00 mm (3.465 inch) |
| Width | 55.00 mm (2.165 inch) |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0404
OE Numbers: MR992374, MR992372, 2466832, 951715, 3880A036
Reference Numbers (Interchange):
SKF: VKBA 7451
SNR: R173.56
FAG: 713 6198 60
Optimal: 951715
Ruville: 8981
Omnicraft: 2466832
Meyle: 214 652 0015
NPS: 951715
FEBI BILSTEIN: 30204272
AIC: 59647
Vehicle Fitment
MITSUBISHI: L200 / Triton (KA_T, KB_T) (2005-2015) 2.4, L200 (K7_T, K6_T, K5_T) (2004-2007) 2.5 DI-D GL 4×4 (K74T), Pajero Sport II (KH_, KG_) (2008-2016)
FIAT: Fullback Pickup (502_, 503_) (2016-) 2.4 D, 2.4 D 4×4 (KT0T)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Wheel bearing kit design for front axle installation on Mitsubishi L200 and Fiat Fullback pickup platforms.
- 50.00 mm inner diameter and 88.00 mm outer diameter match the original bearing envelope on L200 and Fullback front axles.
- 55.00 mm width provides the correct bearing offset for these pickup applications.
- Non-ABS design for vehicles without front anti-lock braking systems at the hub.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 7451, SNR R173.56, FAG 713 6198 60, and Optimal 951715 ensure accurate replacement sourcing.
Installation Notes
- This kit is for front axle applications on Mitsubishi L200 / Triton (KA_T, KB_T) (2005-2015), L200 (K74T) (2004-2007), Pajero Sport II (2008-2016), and Fiat Fullback (2016-) models without front ABS at the hub.
- Confirm the 50.00 mm inner diameter and 88.00 mm outer diameter match your vehicle axle and hub housing.
- Clean the axle spindle and hub housing thoroughly before installation.
- Torque the axle nut and wheel bolts to manufacturer specifications for the specific platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
