Wheel Hub VKBA6841
The DUHUI Bearing VKBA6841 wheel hub is a direct OE-replacement assembly designed for Honda Civic VII Hatchback (EU, EP), Coupe (EM), and Sedan (ES) models from 1999 through 2006. This rear wheel hub bearing matches OE references including 42200-S5A-A01 and 42200-S5A-A51. It features a Gen 3 hub unit design with 4 wheel studs, a 139.00 mm flange diameter, and a non-integrated ABS design, engineered for rear axle applications on this compact car platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0326 |
| Part Number | VKBA6841 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Brake Pilot Diameter | 61.00 mm (2.402 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integral Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0326
OE Numbers: 42200-S5A-A01, 42200-S5A-A51, 42200-S5A-A02
Reference Numbers (Interchange):
SKF: VKBA 6841
FAG: 713618520
SNR: R174.53
NTN: WE60561
KOYO: 3DACF026F-2
Timken: HA590136
BCA: 512174
MOOG: 512174
GMB: 735-0108
Mevotech: H512174
Optimal: 982575
GSP: 363174
Kavo Parts: WBK-4515
Blueprint: ADH28532
Vehicle Fitment
HONDA: Civic VII Hatchback (EU, EP) (1999-2006) 1.4, 1.6, 1.7, 2.0 Type-R, Civic VII Coupe (EM2) (2001-2005) 1.7, Civic VII Sedan (ES, ET) (2000-2006) 1.4, 1.5, 1.6, 1.7
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Honda Civic VII platforms.
- Non-integral ABS tone ring design for vehicles with rear anti-lock braking systems – reuses the original sensor where applicable.
- 139.00 mm flange diameter with 4-stud wheel pattern and 100.00 mm bolt circle matches the original mounting configuration on Civic VII rear axles.
- 56.00 mm wheel pilot diameter and 61.00 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6841, FAG 713618520, SNR R174.53, and NTN WE60561 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic VII Hatchback (1999-2006), Coupe (2001-2005), and Sedan (2000-2006) models.
- Confirm the 4-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Honda Civic VII platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the ABS tone ring and sensor for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
