Wheel Hub VKBA6838
The DUHUI Bearing VKBA6838 wheel hub is a direct OE-replacement assembly designed for Hyundai Matrix (FC) models from 2001 through 2010 and Hyundai Elantra (XD) models from 2000 through 2006. This rear wheel hub bearing matches OE references including 52710-2D000, 52710-2D100, and 52710-2D225. It features a Gen 2 hub unit design with 4 wheel studs, a 139.00 mm flange diameter, and a non-integrated ABS design, engineered for rear axle applications on these compact hatchback and sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0324 |
| Part Number | VKBA6838 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Outer Diameter | 139.00 mm (5.472 inch) |
| Width | 64.00 mm (2.520 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 75.95 mm (2.990 inch) |
| Rim Hole Number | 4 |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integral Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0324
OE Numbers: 52710-2D000, 52710-2D100, 52710-2D225, 52710-2D325, 52710-2D300
Reference Numbers (Interchange):
SKF: VKBA 6838
FAG: 713618280
SNR: R184.15
NTN: HUB194-6
NSK: 42BWKH01
KOYO: DACF1091A
Timken: 512228
BCA: 512228
MOOG: HY-WB-11956
GMB: 735-0309
Mevotech: H512228
Optimal: 982583
Kavo Parts: WBK-4005
Japanparts: KK-22064
Nipparts: J4710529
Vehicle Fitment
HYUNDAI: Matrix (FC) (2001-2010) 1.5 CRDi, 1.5 CRDi VGT, 1.6, 1.8, Elantra III (XD) (2000-2006) 1.6, 1.8, 2.0
KIA: Cerato (LD) (2004-2009) 1.6, 2.0, Spectra (LD) (2005-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Hyundai Matrix FC and Elantra XD platforms.
- Non-integral ABS tone ring design for vehicles with rear anti-lock braking systems – reuses the original sensor where applicable.
- 139.00 mm flange diameter with 4-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Matrix and Elantra rear axles.
- 67.06 mm wheel pilot diameter and 75.95 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6838, FAG 713618280, SNR R184.15, and NTN HUB194-6 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Matrix (FC) (2001-2010) and Elantra (XD) (2000-2006) models with rear ABS.
- Confirm the 4-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Hyundai FC or XD platform.
- Inspect the ABS tone ring and sensor for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
