Wheel Hub VKBA6985
The DUHUI Bearing VKBA6985 wheel hub is a direct OE-replacement assembly designed for Nissan Murano I (Z50) models from 2003 through 2008. This rear wheel hub bearing matches OE references including 43202-CA000, 43202-CA010, and 43202-CA100. It features a Gen 3 hub unit design with 5 wheel studs, a 148.00 mm flange diameter, and an integrated ABS magnetic encoder, engineered for rear axle applications on this crossover SUV platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0376 |
| Part Number | VKBA6985 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 148.00 mm (5.827 inch) |
| Width | 97.00 mm (3.819 inch) |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Spline Count | 29 |
| ABS Sensor | Integrated Magnetic Sensor Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0376
OE Numbers: 43202-CA000, 43202-CA010, 43202-CA100
Reference Numbers (Interchange):
SKF: VKBA6985
SKF: BR930657
SNR: R141.31
Timken: HA590044
NTN: KH30146
NSK: KH30146
Optimal: 962823
Blue Print: ADN18368
Febest: 0282-Z50MR
GMB: GH33150M
Herth+Buss Jakoparts: J4711056
Kavo Parts: WBH-6515
Vehicle Fitment
NISSAN: Murano I (Z50) (2003-2008) 2.5, 3.5, 3.5 SE 4×4, Murano II (Z51) (2007-2015) 2.5, 3.5, Teana (J32) (2003-2008) 2.5 4WD, Presage (U31) (2003-2009) 2.5, 3.5 4WD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and magnetic ABS encoder into one pre-assembled unit for simplified rear axle installation on Nissan Murano Z50 platforms.
- Integrated magnetic sensor ring monitors wheel speed for anti-lock braking systems.
- 148.00 mm flange diameter with 5-stud wheel pattern matches the original mounting configuration on Murano rear axles.
- 30.00 mm inner diameter and 97.00 mm width provide the correct bearing envelope for this crossover SUV platform.
- 29-spline hub design matches the original driveshaft engagement for 4WD applications.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6985, Timken HA590044, SNR R141.31, and NTN KH30146 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Murano I (Z50) (2003-2008), Murano II (Z51) (2007-2015), Teana (J32) (2003-2008) 4WD, and Presage (U31) (2003-2009) 4WD models with rear ABS.
- Confirm the 5-stud wheel pattern and 148.00 mm flange diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and 4 flange bolts to Nissan service manual specifications for the Murano Z50 platform.
- Keep the hub away from strong magnetic sources before installation, as this hub includes an integrated magnetic encoder ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
