Wheel Hub VKBA6981
The DUHUI Bearing VKBA6981 wheel hub is a direct OE-replacement assembly designed for Nissan Almera Tino (V10) models from 2000 through 2006 and Nissan Maxima QX (A33) models from 2000 through 2004. This rear wheel hub bearing matches OE references including 43200-31U06, 43202-0L710, and 43200-37U06. It features a Gen 2 hub unit design with 5 wheel studs, a 148.00 mm flange diameter, and a non-integrated ABS sensor ring, engineered for rear axle applications on these compact MPV and sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0374 |
| Part Number | VKBA6981 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 148.00 mm (5.827 inch) |
| Width | 66.70 mm (2.626 inch) |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Rim Hole Number | 5 |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| ABS Sensor | Non-Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0374
OE Numbers: 43200-31U06, 43202-0L710, 43200-37U06, 43200-37U07, 43202-30R06, 43200-85000
Reference Numbers (Interchange):
SKF: VKBA 6981
FAG: 713613820
FAG: 713 6332 40
SNR: R168.73
NTN: HUB188-6
NSK: 30BWK15
KOYO: DACF1097
TIMKEN: HA590153
BCA: 512203
MOOG: 512203
GMB: 750-0123
Mevotech: H512203
Optimal: 962823
Kavo Parts: WBH-6515
Febest: 0282-V10R
Japanparts: KK-22041
Nipparts: N4711044
Vehicle Fitment
NISSAN: Almera Tino (V10) (2000-2006) 1.8, 2.0, 2.2 Di, Maxima QX (A33) (2000-2004) 2.0 V6, 2.5 V6, 3.0 V6, Maxima QX Station Wagon (A33) (2000-2004)
INFINITI: I30 (2000-2001) 3.0 V6, I35 (2002-2004) 3.5 V6
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Nissan Almera Tino V10 and Maxima QX A33 platforms.
- Non-integral ABS tone ring design for vehicles with rear anti-lock braking systems – reuses the original sensor where applicable.
- 148.00 mm flange diameter with 5-stud wheel pattern matches the original mounting configuration on Almera Tino and Maxima QX rear axles.
- 30.00 mm inner diameter and 66.70 mm width provide the correct bearing envelope for these compact MPV and sedan platforms.
- Ball bearing design provides stable load distribution for rear axle applications.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6981, FAG 713613820, SNR R168.73, and NTN HUB188-6 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Almera Tino (V10) (2000-2006), Maxima QX (A33) (2000-2004), Infiniti I30 (2000-2001), and Infiniti I35 (2002-2004) models with rear ABS.
- Confirm the 5-stud wheel pattern and 148.00 mm flange diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the respective platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the ABS tone ring and sensor for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
