Wheel Hub VKBA6897
The DUHUI Bearing VKBA6897 wheel hub is a direct OE-replacement assembly designed for Subaru Impreza Station Wagon (GF, GD, GG) models from 1992 through 2008, Impreza Sedan (GC, GD, GG, GR) models from 1992 through 2012, and Subaru Legacy Sedan (BC) and Station Wagon (BJF) models from 1989 through 1995. This rear wheel hub bearing matches OE references including 28063-AA000, 28063-AA010, and 28063-AA011. It features a Gen 2 hub unit design with 5 wheel studs, a 126.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these sedan and wagon platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0348 |
| Part Number | VKBA6897 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 126.00 mm (4.961 inch) |
| Flange Offset | 64.64 mm (2.545 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 55.96 mm (2.203 inch) |
| Brake Pilot Diameter | 58.00 mm (2.283 inch) |
| Hub Pilot Diameter | 63.00 mm (2.480 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0348
OE Numbers: 28063-AA000, 28063-AA010, 28063-AA011, 28063-AC000
Reference Numbers (Interchange):
SKF: VKBA 6897
SKF: BR930285
FAG: 713 6172 30
SNR: R181.05
NTN: HUB165-1
NSK: 50BWK08
KOYO: DACF1097
TIMKEN: HA590214
BCA: 512247
MOOG: 512247
GMB: 770-0270
Mevotech: H512247
Optimal: 961805
Kavo Parts: WBK-3501
Febest: 0882-GC8R
Japanparts: KK-21025
Nipparts: N4717008
Vehicle Fitment
SUBARU: Impreza Station Wagon (GF) (1992-2000) 1.6, 1.8, 2.0, Impreza Station Wagon (GD, GG) (2000-2008) 1.5, 1.6, 2.0, Impreza Sedan (GC) (1992-2001) 1.6, 1.8, 2.0, Impreza Sedan (GD, GG) (1999-2009), Impreza Saloon (GR) (2007-2012), Legacy Sedan (BC) (1989-1995), Legacy Station Wagon (BJF) (1989-1994)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Subaru Impreza and Legacy platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems at the hub.
- 126.00 mm flange diameter with 5-stud wheel pattern and 100.00 mm bolt circle matches the original mounting configuration on Impreza and Legacy rear axles.
- 55.96 mm wheel pilot diameter and 58.00 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.25 thread and 64.64 mm flange offset match the OEM attachment geometry.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6897, FAG 713 6172 30, SNR R181.05, and NTN HUB165-1 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Subaru Impreza (1992-2012) and Legacy (1989-1995) models without rear ABS at the hub.
- Confirm the 5-stud wheel pattern and 126.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Subaru service manual specifications for the respective platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
