Wheel Hub VKBA6890
The DUHUI Bearing VKBA6890 wheel hub is a direct OE-replacement assembly designed for Hyundai Elantra III (XD) models from 2000 through 2006. This rear wheel hub bearing matches OE references including 52710-2D110 and 52710-2D111. It features a Gen 2 hub unit design with 4 wheel studs, a 139.00 mm flange diameter, and a non-integrated ABS sensor ring, engineered for rear axle applications on this compact sedan and hatchback platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0347 |
| Part Number | VKBA6890 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inner Diameter | 31.90 mm (1.256 inch) |
| Outer Diameter | 139.00 mm (5.472 inch) |
| Width | 66.00 mm (2.598 inch) |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 75.95 mm (2.990 inch) |
| Rim Hole Number | 4 |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integrated Tone Ring |
| ABS Ring Teeth | 44 |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0347
OE Numbers: 52710-2D110, 52710-2D111, 52710-2D100, 52710-2D101
Reference Numbers (Interchange):
SKF: VKBA 6890
FAG: 713626360
SNR: R184.59
NTN: HUB194-6
NSK: 42BWKH01
KOYO: DACF1091A
TIMKEN: 512229
BCA: 512229
MOOG: 512229
GMB: 735-0310
Mevotech: H512229
Optimal: 982584
Kavo Parts: WBK-4006
Febest: 2282-ELMR
Japanparts: KK-22064
Nipparts: J4710518
Vehicle Fitment
HYUNDAI: Elantra III (XD) (2000-2006) 1.6, 1.8, 2.0, including Hatchback and Sedan
KIA: Cerato (LD) (2004-2009) 1.6, 2.0, Spectra (LD) (2005-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on the Hyundai Elantra XD platform.
- Non-integral ABS tone ring design for vehicles with rear anti-lock braking systems – reuses the original sensor where applicable.
- 139.00 mm flange diameter with 4-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Elantra XD rear axles.
- 31.90 mm inner diameter and 66.00 mm width provide the correct bearing envelope for this compact platform.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6890, FAG 713626360, SNR R184.59, and NTN HUB194-6 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Elantra III (XD) (2000-2006) models with rear ABS.
- Confirm the 4-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Hyundai service manual specifications for the Elantra XD platform.
- Inspect the ABS tone ring and sensor for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
