Wheel Hub VKBA6868
The DUHUI Bearing VKBA6868 wheel hub is a rear axle hub assembly engineered for Mitsubishi Carisma (DA_) models from 1997 through 2006. This rear wheel hub bearing matches OE references including MR223284, MB844220, and MR403807, with cross-references to SKF VKBA 6868 and SNR R173.45. It features a 126.00 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on the Carisma DA rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0334 |
| Part Number | VKBA6868 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 126.00 mm (4.961 inch) |
| Flange Diameter | 126.00 mm (4.961 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.12 kg (4.67 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0334
OE Numbers: MR223284, MB844220, MR403807, MR223283, MB844219
Reference Numbers (Interchange):
SKF: VKBA 6868
SNR: R173.45
FAG: 713 6179 10
MOOG: MI-WB-11768
BLUE PRINT: ADC48233
OPTIMAL: 962707
NIPPARTS: J4715013
KAVO PARTS: WBH-5510
FEBI BILSTEIN: 175518
GSP: 9230045
A.B.S.: 201378
SPIDAN: 27115
TRISCAN: 8530 42111
Vehicle Fitment
MITSUBISHI: Carisma (DA_) (1997-2006) 1.6 (DA1A), 1.6 16V (DA1A), 1.8 (DA2A), 1.8 GDI (DA2A), 1.9 TD (DA4A), 1.9 DI-D (DA4A)
PROTON: Persona, Wira (models using the same rear hub design)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Mitsubishi Carisma (DA_) models without ABS, covering the 1997 through 2006 model range.
- Matches Mitsubishi OE numbers MR223284, MB844220, MR403807, and MR223283 for direct replacement on the Carisma rear axle.
- 126.00 mm flange diameter with 4-hole rim pattern matches the original mounting configuration on Carisma DA rear hubs.
- 30.00 mm inner diameter provides the correct bearing envelope for this application.
- Cross-references to SKF VKBA 6868, SNR R173.45, Blue Print ADC48233, and MOOG MI-WB-11768 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Carisma (DA_) (1997-2006) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 126.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
