Wheel Hub VKBA3798
The DUHUI Bearing VKBA3798 wheel hub is a rear axle hub assembly engineered for Honda Civic Coupe (EJ6, EJ8), Hatchback (EJ9, EK1/3/4), and Sedan (EJ9, EK3/4) models from 1995 through 2001. This rear wheel hub bearing matches OE references including 42200-S04-951 and 42200-SK7-A01, with cross-references to SKF VKBA 3798, FAG 713617430, and SNR R174.41. It features a 133.70 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these Honda Civic rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0203 |
| Part Number | VKBA3798 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 133.70 mm (5.264 inch) |
| Width | 60.90 mm (2.398 inch) |
| Flange Diameter | 133.70 mm (5.264 inch) |
| Bolt Hole Circle Diameter | 100.00 mm (3.937 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.30 kg (5.07 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0203
OE Numbers: 42200-S04-951, 42200-SK7-A01, 42200-S04-008, 42200-SK7-008
Reference Numbers (Interchange):
SKF: VKBA 3798
FAG: 713617430
SNR: R174.41
SPIDAN: 7441
HERTH+BUSS JAKOPARTS: J4714022
BLUE PRINT: ADH28312
MOOG: HO-WB-11760
OPTIMAL: 912193
NIPPARTS: J4714022
TIMKEN: 512174
BCA: 512174
A.B.S.: 201378
Vehicle Fitment
HONDA: Civic VI Coupe (EJ6, EJ8) (1996-2000) 1.6 i (EJ6), 1.6 i VTi (EJ8); Civic VI Hatchback (EJ9, EK1/3/4) (1995-2001) 1.4 i (EJ9), 1.5 i (EK3), 1.6 i (EK4), 1.6 VTi (EK4); Civic VI Saloon (EJ9, EK3/4) (1995-2001) 1.4 i (EJ9), 1.5 i (EK3), 1.6 i (EK4), 1.6 VTi (EK4); Civic VI Aerodeck (MB, MC) (1998-2001) 1.4, 1.5, 1.6, 1.8 (Non-ABS Models)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Honda Civic VI Coupe, Hatchback, Saloon, and Aerodeck models without ABS, covering the 1995 through 2001 model range.
- Matches Honda OE numbers 42200-S04-951, 42200-SK7-A01, 42200-S04-008, and 42200-SK7-008 for direct replacement.
- 133.70 mm flange diameter with 4-hole rim pattern and 100.00 mm bolt circle matches the original mounting configuration on these Civic rear hubs.
- 28.00 mm inner diameter and 60.90 mm width provide the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 3798, FAG 713617430, SNR R174.41, and TIMKEN 512174 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Honda Civic VI Coupe (EJ6, EJ8) (1996-2000), Hatchback (EJ9, EK1/3/4) (1995-2001), Saloon (EJ9, EK3/4) (1995-2001), and Aerodeck (MB, MC) (1998-2001) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 133.70 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
