Wheel Hub VKBA3661
The VKBA3661 wheel hub assembly from DUHUI Bearing provides a direct-fit replacement for the rear axle of select Ford Focus and C-MAX vehicles manufactured between 2003 and 2013. This complete hub assembly is pre-assembled for simplified installation. This kit matches OE specifications including 7M512C299AC and 3M512C299RAA, and interchanges with industry-standard references such as SKF VKBA3661, FAG 713678940, and Ford Genuine 7M512C299AC.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH0174 |
| Part Number | VKBA3661 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Rear Axle |
| Kit Contents | Hub × 1 |
| Outer Diameter | 136.00 mm (5.354 inch) |
| Outer Thread | M12 × 1.5 |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH0174
OE Numbers:
7M512C299AC, 7M512C299AD, 3M512C299RBB, 3M512C299RBC, 3M512C299RAA, 7M512C299AA, 7M512C299AB, 1355129, 1506577, 1230942, 1481197, 1491957, 1766628
Reference Numbers (Interchange):
SKF: VKBA3661
FAG: 713678940
Vehicle Fitment
FORD C-MAX: 2007–2010
FORD FOCUS C-MAX: 2003–2007
FORD FOCUS II (SEDAN): 2004–2013
FORD FOCUS II (CONVERTIBLE): 2006–2010
FORD FOCUS II (4-DOOR SEDAN): 2005–2009
FORD FOCUS II (STATION WAGON): 2004–2012
CHANGAN FORD FOCUS (HATCHBACK, CD5): 2005–2011
CHANGAN FORD FOCUS (SEDAN, CD4): 2005–2011
All applications: Rear Axle. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Ford C1 platform applications. Matches OE specifications including 7M512C299AC.
- 5-bolt wheel mounting pattern provides secure attachment.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Fully assembled kit – no additional components required for installation.
Installation Notes
- Before installation, compare the outer diameter (136.00 mm) against your original hub.
- Confirm thread specification (M12 × 1.5) matches your vehicle’s wheel bolts.
- Torque the hub mounting bolts and wheel nuts to Ford specification.
- This hub fits both rear driver and passenger sides. Sold individually.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies, center support bearings, and related components to OE specifications. Contact us
