Wheel Hub VKBA6565
The DUHUI Bearing VKBA6565 wheel hub is a rear axle hub assembly engineered for Volvo C30, C70 II, S40 II, and V50 models from 2003 through 2013. This rear wheel hub bearing matches OE references including 31262571, 31280051, and 31340686, with cross-references to SKF VKBA 6565, FAG 713660520, and TIMKEN HA590192. It features an integrated ABS sensor, a 136.00 mm flange diameter, and a 5-hole rim pattern, designed for direct replacement on these Volvo P1 platform rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0250 |
| Part Number | VKBA6565 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Gen 3 Hub Unit |
| Flange Diameter | 136.00 mm (5.354 inch) |
| Rim Hole Number | 5 |
| Wheel Stud Size | M10 x 1.5 |
| ABS Sensor | Integrated Sensor Ring |
| Kit Contents | 1 Hub Assembly, 4 Bolts |
| Weight | 3.20 kg (7.05 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0250
OE Numbers: 31262571, 31280051, 31340686, 30666606, 30736501, 31329968
Reference Numbers (Interchange):
SKF: VKBA 6565
FAG: 713660520
TIMKEN: HA590192, HA590322
SNR: R165.36
MOOG: VO-WB-11825
OPTIMAL: 982699
BLUE PRINT: ADJ138221
FEBI BILSTEIN: 175518
GSP: 9336016
A.B.S.: 201281
METZGER: 214 752 0000
NK: 754014
Vehicle Fitment
VOLVO: C30 (2006-2013) 1.6, 1.6 D2, 1.8, 2.0, 2.0 D3, 2.0 D4, 2.4 D5, 2.4 i, 2.5 T5; C70 II (2006-2013) 2.0, 2.0 D3, 2.0 D4, 2.4 D5, 2.4 i, 2.5 T5; S40 II (2003-2012) 1.6, 1.6 D2, 1.8, 1.8 Flexifuel, 2.0, 2.0 D3, 2.0 D4, 2.4 D5, 2.4 i, 2.5 T5; V50 (2003-2012) 1.6, 1.6 D2, 1.8, 1.8 Flexifuel, 2.0, 2.0 D3, 2.0 D4, 2.4 D5, 2.4 i, 2.5 T5
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 rear hub unit with integrated ABS sensor ring for Volvo C30, C70 II, S40 II, and V50 models equipped with anti-lock braking systems.
- Matches Volvo OE numbers 31262571, 31280051, 31340686, 30666606, and 30736501 for direct replacement on the P1 platform rear axle.
- 136.00 mm flange diameter with 5-hole rim pattern matches the original mounting configuration on these Volvo rear hubs.
- Kit includes hub assembly and mounting bolts for complete installation.
- Cross-references to SKF VKBA 6565, FAG 713660520, TIMKEN HA590192, and TIMKEN HA590322 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Volvo C30 (2006-2013), C70 II (2006-2013), S40 II (2003-2012), and V50 (2003-2012) models equipped with ABS.
- Confirm the 5-hole rim pattern and 136.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new hub unit. Any contamination can cause misalignment or runout.
- Torque the wheel bearing to wheel knuckle bolts in two stages: 75 Nm, then 45 degrees. Torque the driveshaft to wheel hub bolt to 45 Nm plus 90 degrees as specified for Volvo P1 platform rear axles.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
