Wheel Hub VKBA3586
The VKBA3586 wheel hub assembly from DUHUI Bearing provides a direct-fit replacement for the rear axle of select Peugeot and Citroën vehicles manufactured between 1996 and 2005, including Peugeot 106, Citroën Saxo, Xsara, and C5 models. This complete hub assembly features a 48-pin ABS connector with integrated gear ring and is pre-assembled for simplified installation. This kit matches OE specifications including 374878, and interchanges with industry-standard references such as SKF VKBA3586, FAG 713630830, and SNR R159.42.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH0143 |
| Part Number | VKBA3586 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Rear Axle |
| Kit Contents | Hub × 1 |
| Inner Diameter | 24.00 mm (0.945 inch) |
| Outer Diameter | 129.00 mm (5.079 inch) |
| Width | 59.00 mm (2.323 inch) |
| Wheel Stud Quantity | 4 |
| Connector Type | 48-pin |
| ABS Sensor | With integrated gear ring |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH0143
OE Numbers:
374878
Reference Numbers (Interchange):
SKF: VKBA3586
FAG: 713630830
SNR: R159.42
Vehicle Fitment
PEUGEOT 106 II (1A/1C): 1996–2004 (1.6, 1.6 S16)
CITROËN SAXO (S0/S1): 1996–2004 (1.6, 1.6 VTL/VTR/VTS)
CITROËN XSARA (N1): 2000–2005 (1.4 HDi, 1.6 16V)
CITROËN C5 I (DC): 2001–2004 (1.8 16V)
CITROËN C5 I BREAK (DE): 2001–2004 (1.8 16V, 2.2 HDi)
All applications: Rear Axle, 4-Hole, 48-pin ABS connector. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Peugeot 106 and Citroën Saxo/Xsara/C5 applications. Matches OE specification 374878.
- 48-pin ABS connector with integrated gear ring ensures proper anti-lock braking system function.
- 4-bolt wheel mounting pattern provides secure attachment.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Fully assembled kit – no additional components required for installation.
Installation Notes
- Verify your vehicle is equipped with ABS before installation. This hub includes a 48-pin ABS connector with integrated gear ring.
- Before installation, compare the inner diameter (24.00 mm), outer diameter (129.00 mm), and width (59.00 mm) against your original hub.
- Confirm the 4-bolt wheel pattern matches your vehicle.
- Connect the ABS sensor harness properly and ensure the cable is routed away from rotating components.
- Torque the hub mounting bolts and wheel nuts to PSA Group specification.
- This hub fits both rear driver and passenger sides. Sold individually.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies, center support bearings, and related components to OE specifications. Contact us
