Wheel Hub VKBA625
The DUHUI Bearing VKBA625 wheel hub is a rear axle hub assembly engineered for Fiat Panda (141A), Ritmo (138A), Regata (138), Punto (170), Seicento (187), and Lancia Delta (831AB0), Prisma, Y10 models from 1978 through 2010. This rear wheel hub bearing matches OE references including 21149002A, 3981594, and SE021149002A, with cross-references to SKF VKBA 625, FAG 713690240, and SNR R158.10. It features a 116.00 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these classic Fiat and Lancia rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0223 |
| Part Number | VKBA625 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 116.00 mm (4.567 inch) |
| Width | 60.00 mm (2.362 inch) |
| Flange Diameter | 116.00 mm (4.567 inch) |
| Bolt Hole Circle Diameter | 98.00 mm (3.858 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 1.61 kg (3.55 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0223
OE Numbers: 21149002A, 3981594, SE021149002A, 7599461, 46404841
Reference Numbers (Interchange):
SKF: VKBA 625
FAG: 713690240
SNR: R158.10
SPIDAN: 26511
OPTIMAL: 802318
QUINTON HAZELL: QWB673
Borg & Beck: BK1014, BK250
BRTEC: BRT1128
FLENNOR: FR891207
BORG & BECK: BWK059
GHK: GHK1092
MWK: MWK274
VBK: VBK541, VBK554
Vehicle Fitment
FIAT: Panda (141A) (1980-2004) 650, 750, 800, 900, 1000, 1000 i.e., 1100, 1100 Trekking, 1300 D; Ritmo (138A) (1978-1988) 1.1, 1.3, 1.5, 1.6, 1.9 D, 2.0 TC; Regata (138) (1983-1995) 1.1, 1.3, 1.5, 1.6, 1.9 D; Punto (170) Hatchback (1991-1999) 1.1, 1.2, 1.4, 1.6, 1.7 D; Seicento (187) (1997-2010) 0.9, 1.1 (Non-ABS Models)
LANCIA: A 112 (1978-1986) 0.9, 1.0; Delta I (831AB0) (1979-1994) 1.3, 1.5, 1.6, 1.6 HF Turbo, 2.0; Prisma (831AB0) (1983-1992) 1.3, 1.5, 1.6; Y10 (156) (1985-1995) 1.0, 1.1, 1.3
AUTOBIANCHI: A 112 (1969-1986) 0.9, 1.0
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Fiat Panda, Ritmo, Regata, Punto, Seicento, and Lancia Delta, Prisma, Y10, A 112 models without ABS.
- Matches Fiat, Lancia, and Seat OE numbers 21149002A, 3981594, SE021149002A, and 7599461 for direct replacement.
- 116.00 mm flange diameter with 4-hole rim pattern and 98.00 mm bolt circle matches the original mounting configuration on these rear hubs.
- 30.00 mm inner diameter and 60.00 mm width provide the correct bearing envelope for this application.
- Cross-references to SKF VKBA 625, FAG 713690240, SNR R158.10, and QUINTON HAZELL QWB673 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Fiat Panda (141A) (1980-2004), Ritmo (138A) (1978-1988), Regata (138) (1983-1995), Punto (170) (1991-1999), Seicento (187) (1997-2010), and Lancia Delta I (831AB0) (1979-1994), Prisma (831AB0) (1983-1992), Y10 (156) (1985-1995), A 112 (1978-1986), Autobianchi A 112 (1969-1986) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 116.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
