Wheel Hub VKBA3975
The DUHUI Bearing VKBA3975 wheel hub is a rear axle hub assembly engineered for Toyota Corolla E12 hatchback, sedan, and estate models from 2000 through 2008 with ABS. This rear wheel hub bearing matches OE references including 42450-02060, 42450-12070, and 42450-13010, with cross-references to SKF VKBA 3975, FAG 713618810, and SNR R169.63. It features an integrated ABS sensor ring, a 135.00 mm flange diameter, and a 4-hole rim pattern, designed for direct replacement on the Corolla E12 rear axle with ABS.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0222 |
| Part Number | VKBA3975 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Gen 3 Hub Assembly |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 135.00 mm (5.315 inch) |
| Flange Diameter | 135.00 mm (5.315 inch) |
| Bolt Hole Circle Diameter | 100.00 mm (3.937 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Integrated Sensor Ring |
| Weight | 2.45 kg (5.40 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0222
OE Numbers: 42450-02060, 42450-12070, 42450-13010, 42450-12051, 42450-12050, 42410-12210, 42450-12081, 42410-12220
Reference Numbers (Interchange):
SKF: VKBA 3975
FAG: 713618810
SNR: R169.63
HERTH+BUSS JAKOPARTS: J4712067, J4712072
OPTIMAL: 982228
BLUE PRINT: ADT38352
NIPPARTS: J4712072
A.B.S.: 201284
GSP: 9230035
JAPANPARTS: KK-22047
Vehicle Fitment
TOYOTA: Corolla (_E12_) Hatchback (2001-2007) 1.4 VVT-i (ZZE120_), 1.6 VVT-i (ZZE121_), 1.8 VVTL-i TS (ZZE123), 2.0 D-4D (CDE120_); Corolla (_E12_) Saloon (2000-2008) 1.4 VVT-i (ZZE120_), 1.6 VVT-i (ZZE121_), 2.0 D-4D (CDE120_); Corolla (_E12_) Estate (2001-2008) 1.4 D4-D (NDE120_), 1.4 VVT-i (ZZE120_), 1.6 VVT-i (ZZE121_), 2.0 D-4D (CDE120_) (ABS Models)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 rear hub unit with integrated ABS sensor ring for Toyota Corolla E12 models equipped with anti-lock braking systems.
- Matches Toyota OE numbers 42450-02060, 42450-12070, 42450-13010, and 42450-12051 for direct replacement on the Corolla E12 rear axle.
- 135.00 mm flange diameter with 4-hole rim pattern and 100.00 mm bolt circle matches the original mounting configuration on the Corolla E12 rear hub with ABS.
- Pre-assembled hub unit with sealed bearing simplifies installation and eliminates bearing pressing.
- Cross-references to SKF VKBA 3975, FAG 713618810, SNR R169.63, and HERTH+BUSS JAKOPARTS J4712067 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Toyota Corolla E12 (2000-2008) models equipped with ABS. Confirm your vehicle has ABS before ordering.
- Confirm the 4-hole rim pattern and 135.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new hub unit.
- Torque the axle nut and wheel bolts to Toyota service manual specifications for the E12 platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
