Wheel Hub VKBA3960
The DUHUI Bearing VKBA3960 wheel hub is a rear axle hub assembly engineered for Mazda 121 II (DB) and Demio (DW) models from 1990 through 2003. This rear wheel hub bearing matches OE references including B102-26-15XA, B201-26-15X, and D102-26-15XA, with cross-references to SKF VKBA 3960, FAG 713615040, and SNR R170.35. It features a 121.60 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these Mazda rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0220 |
| Part Number | VKBA3960 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 121.60 mm (4.787 inch) |
| Width | 67.20 mm (2.646 inch) |
| Flange Diameter | 121.60 mm (4.787 inch) |
| Bolt Hole Circle Diameter | 100.00 mm (3.937 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.20 kg (4.85 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0220
OE Numbers: B102-26-15XA, B201-26-15X, D102-26-15XA, D201-26-15X
Reference Numbers (Interchange):
SKF: VKBA 3960
FAG: 713615040
SNR: R170.35
SPIDAN: 27459
HERTH+BUSS JAKOPARTS: J4713030
MOOG: MD-WB-11872
OPTIMAL: 942505
BLUE PRINT: ADM58306
NIPPARTS: J4713030
TIMKEN: 512262
BCA: 512262
A.B.S.: 201374
Vehicle Fitment
MAZDA: 121 II (DB) Saloon (1990-1997) 1.3 16V, 1.8 D (Non-ABS Models); Demio (DW) (1996-2003) 1.3 16V, 1.5 16V, 1.4 TD (Non-ABS Models)
FORD: Fiesta (models using the same rear hub design)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Mazda 121 II (DB) and Demio (DW) models without ABS, covering the 1990 through 2003 model range.
- Matches Mazda OE numbers B102-26-15XA, B201-26-15X, D102-26-15XA, and D201-26-15X for direct replacement.
- 121.60 mm flange diameter with 4-hole rim pattern and 100.00 mm bolt circle matches the original mounting configuration on these Mazda rear hubs.
- 28.00 mm inner diameter and 67.20 mm width provide the correct bearing envelope for this application.
- Cross-references to SKF VKBA 3960, FAG 713615040, SNR R170.35, and SPIDAN 27459 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Mazda 121 II (DB) (1990-1997) and Demio (DW) (1996-2003) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 121.60 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
